Advanced Wireless Settings - D-Link DIR-625 - RangeBooster N Router Wireless User Manual

Section  - Configuration
Transmit Power:
Set the transmit power of the antennas.
Beacon Period:
Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value.
100 is the default setting and is recommended.
RTS Threshold:
This value should remain at its default setting of
2432. If inconsistent data flow is a problem, only a
minor modification should be made.
Fragmentation
The fragmentation threshold, which is specified
Threshold: in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission. 2346
is the default setting.
DTIM Interval:
(Delivery Traffic Indication Message) 3 is the default
setting. A DTIM is a countdown informing clients
of the next window for listening to broadcast and
multicast messages.
802.11d: This enables 802.11d opration. 802.11d is a wireless specification developed to allow implementation of wireless networks in
countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.
WMM Function:
WMM is QoS for your wireless network. Enable this option to improve the quality of video and voice applications for your
wireless clients.
Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it's less reliable and may
create higher data loss.
D-Link DIR-65 User Manual

Advanced Wireless Settings