Soltech VICTORIA Installation Manual

VICTORIA
15W
Installation Manual
SOLTECH Designs and Manufactures
Advanced, Solar-Powered
LED Technology.
Thank you for purchasing VICTORIA Solar Post Top Light.
Introduction
Outdoor solar lighting systems use solar cells which convert sunlight
into electricity. Electricity is stored in batteries for use at night.
VICTORIA solar lights are easy to install and virtually maintenance
free. Using them won't increase your electric bill.
Important
Please make sure that the light is installed in an area with sufficient
sunlight irradiance. A strict minimum of 3.5 hours/day of sunshine on
average is recommended. Select the right operating mode according
to the local legislation needs and the local sunshine conditions. Keep it
away from shadows.
Please save these instructions. Read all the instructions carefully
before attempting to carry out any installation or wiring. Do not open
or attempt to repair the product on your own, as it may cause serious
damage and would void the product warranty. Contact your local
distributor for any questions concerning the installation.
SOLTECH LLC reserves the right to update all
product data sheets at any time. Consult SOLTECH
marketing specialists for publication updates at
hello@soltechlighting.com
Copyright©2018–2024 SOLTECH LLC,
All Rights Reserved.
02
I soltechlighting.com I hello@soltechlighting.com I (510) 891-1056
Precautions when working with solar panels
When the solar panel is exposed to sunlight, a voltage appears at the
output terminals of the solar panel turning it into a source of electricity.
To avoid a shock hazard, make sure the solar panel is covered with an
opaque (dark) later such as cardboard or cloth during the installation. Do
not contact the terminals when the panel is exposed to sunlight or any
other light source.
PRODUCT SIZE
ø4.25 inches
I 1460 Park Avenue, Emeryville, CA 94608
ø16.4 inches
I