Removing Imc Deployed In Centralized Mode; Removing Imc Deployed In Distributed Mode - 3Com H3C IMC PROFESSIONAL PLATFORM Installation Manual

Removing iMC Deployed in Centralized Mode

1) Select Start > Programs > 3Com Intelligent Management
Center > 3Com Deployment Monitoring Agent.
2) In the popup window, select Stop iMC in the Monitor tab to stop
all processes of iMC.
3) Select Start > Programs > 3Com Intelligent Management
Center > Uninstall 3Com Intelligent Management Center. A
window appears to guide you through the rest of the process.
4) Click Next.
5) Click Finish when the Uninstallation Completed dialog box
appears.

Removing iMC Deployed in Distributed Mode

To remove the iMC software deployed in distributed mode, you must
remove the components deployed on the slave server before
removing the iMC software deployed on the master server.
Removing components deployed on the slave server
1) Select Start > Programs > 3Com Intelligent Management
Center > 3Com Deployment Monitoring Agent.
2) In the window displayed, select Stop iMC in the Monitor tab to
stop all processes of iMC.
3) In the Deploy tab, right-click the component deployed on the slave
server and select Uninstall the Component. A dialog box
appears, indicating that the component was successfully
removed.
4) Click OK.
After all deployed components are removed, remove the intelligent
deployment monitoring agent. Perform the following steps:
5-3