TESTO 104-IR BT Quick Start Manual

The right
Important information on the operation and maintenance of the testo 104-IR BT.
Infrared Measurement
Care and Maintenance
Clean Instrument
Clean the instrument under running water with
mild detergent.
way to measure.
Connect
Use the tablet to pair the 104-IR BT with
your Smart Device / Tablet.
Measure
Press and hold the ON [ ] button and point
the laser towards the measuring object. The
two laser points show the exact limits of the
measurement area. For this reason, make sure
that both laser points are positioned on the
measurement object.
Clean Lenses
Gently dampen the lenses with water or ethyl
alcohol and clean with a cotton swab.
Align
Aim the infrared measuring sensor towards the
object to be measured. Do not measure from
distances less than 3 feet.
Check
Press the middle [ ] button on the 104-IR
BT to transfer the measurement result via
Bluetooth to your Smart Device / Tablet.
Laser Hazard
Do not look directly into the laser.
It can cause blindness.