Advertisement
Do you have a question about the CB-250 and is the answer not in the manual?
How far up and in do I make my hole on 3/4 door? And is this lock left or right door application?
The COMPX CB-250 lock requires the following hole placement measurements for installation on a 3/4" thick door:- Diameter of the main bore hole: 3/4" (19.05 mm)- Center of the bore hole should be located 7/8" (22.23 mm) from the edge of the door.The COMPX CB-250 is non-handed, meaning it is suitable for both left-hand and right-hand door applications.
This answer is automatically generated
Need help?
Do you have a question about the CB-250 and is the answer not in the manual?
Questions and answers
How far up and in do I make my hole on 3/4 door? And is this lock left or right door application?
The COMPX CB-250 lock requires the following hole placement measurements for installation on a 3/4" thick door:
- Diameter of the main bore hole: 3/4" (19.05 mm)
- Center of the bore hole should be located 7/8" (22.23 mm) from the edge of the door.
The COMPX CB-250 is non-handed, meaning it is suitable for both left-hand and right-hand door applications.
This answer is automatically generated