Page 1
(5) and HB bottom rail (6) as shown below, using JCB M6 X 110mm (A) and barrel nut (B). Tighten with the Allen wrench (E). Adult assembly Adult assembly JCB M6 X 110mm Barrel Nut CODE ITEM HBFB-ISL-NOHO G-12912X Page 1 of 3...
Page 2
Guide the headboard panel (1) in carefully so that it won’t jump out of its grooves. Step 3 Be sure it fits fully into the groove at the end (in the post) before fitting the other post. Attach the right post (3) to headboard assembly as shown below, Step 4 Adult assembly Adult assembly...
Page 3
Step 5 Lay the left leg (8) bracket face up on smooth surface. Connect FB top rail (10) and FB bottom rail (11) as shown below, using JCB M6 X 110mm (A) and barrel nut (B). Tighten with the Allen wrench (E). Guide the footboard panel (7) in carefully so that it won’t jump out of its grooves.
Page 4
TWIN HARDWARE HARDWARE HEADBOARD SIDE RAILS BOX 1 BOX 2 FOOTBOARD SLAT KIT Step 1 Attach the side rails (04) to the headboard (02) and footboard (03) using JCB M8 X 15mm (C). Tighten with Allen wrench M6 (F). Adult assembly JCB M8 X 15mm Allen wrench M6 Step 2...
BED FRAME TWIN READY ASSEMBLY INSTRUCTIONS Before assembling your bed frame, please read through these ASSEMBLE instructions carefully and familiarize yourself with the different parts. ATTENTION! If you receive a damaged or defective item, please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726 PARTS LIST HARDWARE SIDE RAIL...
BED DRAWER TWIN/FULL ASSEMBLY INSTRUCTIONS READY Before assembling your bed drawer, please read through these instructions carefully, familiarize yourself with the different parts. ATTENTION! If you receive a damaged or defective item, please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726 Allen wrench Adult assembly NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
TWIN/FULL Step 2 Guide the drawer bottoms (05) and drawer middle (06) in carefully so that they align inside grooves. Be sure it fits fully into the face and side groove before attaching the drawer back (04). Attach drawer center support (07) to bottom of drawer face using wood screw 1 1/4" (B). Tighten with Phillips head screw driver.
Need help?
Do you have a question about the HBFB-ISL-NOHO and is the answer not in the manual?
Questions and answers