Related Manuals for FastTt Tri Bottle Bracket
Summary of Contents for FastTt Tri Bottle Bracket
- Page 1 [Designed for Speed] Tri Bottle Bracket INSTALLATION GUIDE www.FastTT.bike www.fastTT.bike FastTT Tri Bottle Bracket Installation Guide...
- Page 2 Tri Bottle Bracket! The following instructions will guide you through the installation process. The FastTT Tri Bottle Bracket is an asymmetric design and can be flipped around to provide a wide range of forward/back positions (up to 60mm adjustment). The brackets are available in three widths to suit your bike.
- Page 3 The bracket can be mounted directly to the top of your spacer stack or onto your elbow mounting brackets. When fitting FastTT aero bars, the BTA bracket can be fitted below the bar mounting bracket or below the adjustable angled riser.
- Page 4 5.5mm drill. If they are M6 (6mm thread width) use a 6.5mm drill. Remove any protruding edges or burrs before installing. Once the holes are drilled you can mount the bracket and your bottle system. Adjust where you want your bottle to be positioned. www.fastTT.bike FastTT Tri Bottle Bracket Installation Guide...
-
Page 5: Warranty
The manufacturer (Bold Horizon Ltd t/a FastTT) assumes no responsibility or liability for any injury, loss or damage caused as a result of using this product under any conditions. All FastTT products are supplied with a 24-month manufacturers defect warranty. Any damage caused by misuse, incorrect installation, modification, accident, or any other cause is not covered by the manufacturer’s warranty.
Need help?
Do you have a question about the Tri Bottle Bracket and is the answer not in the manual?
Questions and answers