Page 2
FastTT adjustable angled risers provide a wide range of bar angle adjustment from 10° to 25°. The risers are supplied with the correct M5 (5mm) bolts. Please note that the maximum thread depth for the top mounting bolts is 10mm. If you use longer threads, the top and bottom blocks will not seat or tighten properly, resulting in slippage.
Page 3
MUST ALWAYS be installed with the supplied washer. You are now ready to install the aero bars. Please reference the appropriate aero bar and adjustable riser installation guides on our website, as follows: FastTT Cervelo S5 Adapter Kit Installation Guide www.fastTT.bike...
The manufacturer (Bold Horizon Ltd t/a FastTT) assumes no responsibility or liability for any injury, loss or damage caused as a result of using this product under any conditions. All FastTT products are supplied with a 24-month manufacturers defect warranty. Any damage caused by misuse, incorrect installation, modification, accident, or any other cause is not covered by the manufacturer’s warranty.