Advertisement
Table of Contents
Contents
Tecno Pova 4 Pro, LG8n Manual
Explosion diagram specification
| 1 | FL(CTP+LCM) | 2 | REC DECO |
| 3 | F HSG ASM | 4 | R CAM CON FOAMS |
| 5 | F CAM RUBBER | 6 | PCBA MB |
| 7 | MAIN SHIELD MYLAR | 8 | REC |
| 9 | CAM AI | 10 | CAM AF 50M |
| 11 | REC COP FOIL | 12 | FPC SIDE KEY |
| 13 | CAM FF 8M | 14 | FM |
| 15 | MAIN RADIATING FILM | 16 | MAIN WR FRAME ASM |
| 17 | R CAM PD FRAME ASM | 18 | MAIN WR FRAME MYLAR |
| 19 | MID HSG ASM | 20 | CARD HOLDER ASM |
| 21 | MC SCREW M1.4*L2.5*D2.5 | 22 | MC SCREW M1.4*L3.5*D2.5 |
| 23 | BAT COVER ASM | 24 | R CAM LENS 50M |
| 25 | R CAM LENS 2M | 26 | MC SCREW M1.4*L2.0*D3.0 |
| 27 | SPK FRAME ASM | 28 | EARPHONE RUBBER |
| 29 | USB RUBBER | 30 | MOTOR |
| 31 | BAT | 32 | COAXIAL CABLE |
| 33 | PCBA SUB | 34 | SPK |
| 35 | FPC MAIN | 36 | MOTOR CON FB |
| 37 | NFC ANT FPC | 38 | R CAM RUBBER 2M |
| 39 | DISTANCE SENSOR RUBBER |
Know your phone
- Front camera
- Volume + key
- Volume - key
- Power key & side fingerprint sensor
- NFC
SIM/SD card installation
- Power off mobile.
- Refer to the following picture for SIM / SD card installation.
![SIM/SD card installation]( "Tecno - Pova 4 Pro - SIM/SD card installation")
Charging the phone
You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone).
Use only TECNO charger and cables. Other chargers or cables may damage the device. This will invalidate your phone warranty.
Documents / ResourcesDownload manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the Pova 4 Pro and is the answer not in the manual?
Questions and answers