Tecno POP 5, BD2 Manual

Know your phone

1. Status LED
2. Front camera
3. Front flash
4. Volume key
5. Power key

SIM/SD card installation

1. Power off mobile.
2. Refer to the following picture for SIM / SD card installation.

Charging the phone

You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone).

1. Please remind the front and back of the plug.
2. Use only TECNO charger and cables. Other chargers or cables may damage the device. This will invalidate your phone warranty.

Operating Frequency:
E-GSM900: 880-915MHz (TX),
925-960MHz (RX);
DCS1800: 1710-1785 MHz (TX),
1805-1880 MHz (RX);
WCDMA BAND I:1920-1980 MHz (TX),
2110-2170 MHz (RX);
WCDMA BAND VIII: 880-915MHz (TX),
925-960MHz (RX);
BT: 2402-2480 MHz (TX/RX);

Wi-Fi (2.4G): 2412-2472 MHz (TX/RX);
GPS:1.57542GHz(RX)
FM:87.5-108 MHz(RX)

Modulation mode:
GMSK, 8PSK (GSM)
BPSK, QPSK,16-QAM(WCDMA)
GFSK, π/4-DQPSK, 8DPSK (BT)
GFSK (BLE)
DSSS (DBPSK, DQPSK, CCK) for IEEE
802.11b
OFDM(BPSK,QPSK,16QAM,64QAM) for
IEEE 802.11g/n HT-20 (WiFi)
BPSK (GPS)
FM (FM)

RF Output Power:
GSM900: 33dBm±2dB
DCS1800: 30dBm±2dB WCDMA BAND I/VIII:
24dBm+1.7dB/-3.7dB
Bluetooth: 0-10dBm
WiFi: 14dBm+/-3d

1. Use careful with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss.
2. Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
3. The product shall only be connected to a USB interface of version USB 2.0.
4. Adapter shall be installed near the equipment and shall be easily accessible.
5. Operating temperature:-10℃~ +55℃(Standalone); 5~+40℃(with adapter).
6. Adapter1: U060TKA
   Input: 100-240V~50/60Hz 300mA
   Output: DC 5.0V 1.2A
   Adapter2: CU-52AT
   Input: 100-240V~50/60Hz 200mA
   Output: DC 5.0V 1.2A
   Adapter3: U050TEA
   Input: 100-240V~50/60Hz 200mA
   Output: DC 5.0V 1.0A
7. The device complies with RF specifications when the device used at 5 mm from your body, and the holder must not be of metal composition.
8. To prevent possible hearing damage, do not listen at high volume levels for long periods.
9. Earphone and USB cable are shielded.