Table of Contents
Advertisement
Quick Links
003
WELLS BLOOMFIELD, LLC
2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439
telephone: 775-689-5703
fax: 775-689-5976
www.wellsbloomfield.com
OPERATION MANUAL
WELLS
COUNTERTOP
WARMERS
with
BI-METAL SWITCH
Model LLW-7
CONTROL
Includes
INSTALLATION
USE & CARE
Model LLW-1220
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
PRINTED IN UNITED STATES OF AMERICA
45827
08
p/n
Rev. E
ECN-13420
M003
0214 cps
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wells LLW-7
Summary of Contents for Wells LLW-7
- Page 1 Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.
- Page 2 (775) 689-5707 or fax (775) 689-5976 if service is performed by unauthorized personnel. The prices charged by Wells Bloomfield for its products are for information and other details concerning warranty. SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS Resetting of safety thermostats, circuit breakers, over cleaning schedules, are customer responsibility.
-
Page 3: Specifications
PARTS & SERVICE CUSTOMER SERVICE DATA INTRODUCTION Thank You for purchasing this Wells Bloomfield appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life. -
Page 4: Features & Operating Controls
FEATURES & OPERATING CONTROLS A. THERMOSTAT 1. Warmers are equipped with a bi-metal style thermostat. Power is applied to the heating element according to the control knob position and the actual temperature at the bi-metal sensing element. 2. The desired temperature is controlled by rotating the TEMPERATURE CONTROL KNOB. -
Page 5: Precautions And General Information
Damage Do not operate this appliance if the control panel is damaged. Call to the appliance may result if your Authorized Wells Service Agent for service. these instructions are not followed. The technical content of this manual, including any wiring diagrams, schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel. -
Page 6: Installation
INSTALLATION NOTE: DO NOT discard UNPACKING & INSPECTION the carton or other packing Carefully remove the appliance from the carton. Remove all materials until you have protective plastic film, packing materials and accessories from the inspected the appliance for Appliance before connecting electrical power or otherwise performing hidden damage and tested it any installation procedure. -
Page 7: Operation
CAUTION: between the change in wet or dry operation. SHOCK HAZARD c. Wells Manufacturing recommends operating WET for consistent food heating. DO NOT splash or pour water d. If your wet-operation warmer is allowed to run dry, turn it onto control panel or wiring. - Page 8 ESTIMATED PREHEAT TIMES BY MODEL PREHEAT TIME MODEL CAPACITY WELL MATERIAL LLW-4 4 QT INSET ANODIZED ALUMINUM 20 min. 15 min. LLW-7 7 QT INSET ANODIZED ALUMINUM 20 min. 15 min. LLW-11 11 QT INSET ANODIZED ALUMINUM 20 min. 15 min.
-
Page 9: Cleaning Instructions
DO NOT submerge warmer causing a potential fire and/or electric shock hazard. Contact your in water. Authorized Wells Service Agency to inspect warmer if you suspect water or grease contamination. - Page 10 6. Refill pans with hot tap water and resume operation. 7. Heavy scale buildup may require additional treatments. DO NOT USE DELIMER ON ALUMINUM SURFACES! Follow the Daily Cleaning Instructions for Anodized Aluminum on Page 10 for LLW-4, LLW-7 and LLW-11...
-
Page 11: Troubleshooting Suggestions
Remove water from pan until 1” Too much water in pan of water remains in pan There are no user-serviceable components in this appliance. In all instances of damage or malfunction, contact your Authorized Wells Service Agency for repairs. -
Page 12: Maintenance Instructions
CARE OF ANODIZED ALUMINUM (LLW-4, LLW-7, LLW-11) The well in your Wells Warmer or Soup Cooker is constructed of high quality anodized aluminum. As long as the anodized surface layer is intact, the equipment will not corrode. The anodized surface can be damaged by mechanical abrasion, hard water deposits and chlorine: 1. -
Page 13: Care Of Stainless Steel
Never use metal implements, wire brushes, abrasive scratch pads or steel wool to clean stainless steel. Warmer pans, insets and other vessels are subject to a harsher environment. Wells Manufac- turing uses a very high quality stainless steel (#304DDQ) for our food warmer pans. Even the... -
Page 14: Parts And Service
PARTS & SERVICE DESCRIPTION PART NO. Always use an inset. DO NOT place food directly INSETS into the warmer pan. 2½ QT. ROUND INSET w/ lid 20773 4 QT. ROUND INSET w/ lid 20774 7 QT. ROUND INSET w/ lid 20587 11 QT. -
Page 15: Customer Service Data
6 oz. SOUP LADLE 21764 For factory authorized service, or to order factory LEGS FOR LLW-1220 authorized replacement parts, contact your Wells authorized LEGS, 1” Plastic Adjustable, set of 4 21109 service agency, or call: LEGS, 4” Plastic Adjustable, set of 4 20314... - Page 16 Commercial Food Equipment Service Association Wells Bloomfield proudly supports CFESA Commercial Food Equipment Service Association SERVICE TRAINING - QUALITY SERVICE SERVICE TRAINING - QUALITY SERVICE Genuine Parts Protect - YOU - All - Ways CUSTOMER SATISFACTION CUSTOMER SATISFACTION WELLS BLOOMFIELD, LLC 2 ERIK CIRCLE, P.
Need help?
Do you have a question about the LLW-7 and is the answer not in the manual?
Questions and answers