Wells MOD-300TDM/AF Owner's Manual
  1. Manuals
  2. Brands
  3. Wells Manuals
  4. Food Warmer
  5. MOD-300TDMAF
  6. Owner's manual

Wells MOD-300TDM/AF Owner's Manual

Built-in three-well modular auto-fill warmers
Hide thumbs Also See for MOD-300TDM/AF:
Table of Contents

Advertisement

Quick Links

011C
WELLS BLOOMFIELD, LLC
10 Sunnen Drive P.O.Box 430195
St. Louis, MO
63143 USA
telephone: 314-781-2777
fax: 314-781-2714
www.wellsbloomfield.com
OWNERS MANUAL
BUILT-IN
THREE-WELL
MODULAR AUTO-FILL
WARMERS
MODELS
MOD-300TDM/AF
MOD-300TDMN/AF
MOD-300TDM/AF
MOD-327TDM/AF
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
MOD-300TDMN/AF
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
PRINTED IN UNITED STATES OF AMERICA
2M-308024 Rev. (-)
09
p/n
M011C.13
0217 cps

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MOD-300TDM/AF and is the answer not in the manual?

Questions and answers

Related Manuals for Wells MOD-300TDM/AF

Summary of Contents for Wells MOD-300TDM/AF

  • Page 1 Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.

  • Page 2: Warranty

    The for information and other details concerning warranty. prices charged by Wells Bloomfield for its products are SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS Resetting of safety thermostats, circuit breakers, over cleaning schedules, are customer responsibility.

  • Page 3: Table Of Contents

    PARTS & SERVICE CUSTOMER SERVICE DATA INTRODUCTION Thank You for purchasing this Wells Bloomfield appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life.

  • Page 4: Features & Operating Controls

    3. See the Installation Instructions, supplied with the particular appliance, for details. C. DRAINS 1. AUTOFILL units (e.g. MOD-300TDM/AF) have their individual drain fittings manifolded together, with a single drain valve for the entire manifold. D. AUTOFILL 1.

  • Page 5: Precautions & General Information

    Do not operate this appliance if the control panel is damaged. Call these instructions are not your Authorized Wells Service Agent for service. followed. The technical content of this manual, including any wiring diagrams, schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel.

  • Page 6: Installation

    INSTALLATION NOTE: DO NOT discard UNPACKING & INSPECTION the carton or other packing Carefully remove the appliance from the carton. Remove all materials until you have protective plastic film, packing materials and accessories from the inspected the appliance for Appliance before connecting electrical power or otherwise performing hidden damage and tested it any installation procedure.
  • Page 7 INSTALLATION For “top-mounted” warmers (i.e. warmers mounted from above the counter top): a. Verify that provided sealants are applied to the underside of the warmer top flange prior to setting the unit into the cutout. b. After installation, verify that the tabs on the Wellsloks are turned out to lock the warmer into the counter c.

  • Page 8: Operation

    OPERATION AUTOFILL WARMERS CAUTION: HOT SURFACE 1. Autofill warmers sense water level by a sensor placed at the proper level. For manifolded autofill warmers, the water level Exposed surfaces can be hot sensor / fill tube is in one pan only, normally in the far left pan. to the touch and may cause 2.

  • Page 9: Maintenance Instructions

    Never use metal implements, wire brushes, abrasive scratch pads or steel wool to clean stainless steel. Warmer pans, insets and other vessels are subject to a harsher environment. Wells Manufacturing uses an very high quality stainless steel (#304DDQ) for our food warmer pans.

  • Page 10: Cleaning Instructions

    Contact your Authorized Wells Service Agency to inspect warmer if water or grease contamination is suspected. Close drain valve. Add proper amount of warm water. Turn control...
  • Page 11 CLEANING INSTRUCTIONS WEEKLY CLEANING INSTRUCTIONS CAUTION: CHEMICAL BURN PREPARATIONS: Remove any insets, pans and/or adapter tops. HAZARD Drain or remove water from well if used for wet operation. Deilimng chemicals may be caustic. Wear appropriate FREQUENCY: Weekly, or whenever lime or scale is seen personal protective equipment.

  • Page 12: Troubleshooting Suggestions

    One or more pans of an auto-fill Blocked drain manifold Clean drain manifold unit do not fill There are no user-serviceable components in this appliance. In all instances of damage or malfunction, contact your Authorized Wells Service Agency for repairs.

  • Page 13: Exploded View & Parts List

    ELEMENT & PAN ASSEMBLY 55687 ELEMENT ONLY 503843 (208/240V) 503375 (208/240V) 60034 ELEMENT 50177 503141 PAN KIT 54136 503842 THERMOBULB (ref.) 66529 503352 66591 BOTTOM 60498 make from 66587 56050 SIDES (150' roll) make from 56196 WELLS (150' roll) 55005...
  • Page 14 ELEMENT & PAN ASSEMBLY 503701 (208/240V) 55609 51040 THERMOBULB 65917 50131 (ref.) 50177 61974 54136 503352 55687 60034 50177 503141 54136 66529 66591 60498 bottom 66587 make from 56050 (150' roll) WELLS sides & ends make from 56196 (150' roll)
  • Page 15 (pk 6) 68198 504101 68197 500706 67650 55609 503713 ELEMENT & PAN ASSY 67662 503840 (incl. 50397 66591 ELEMENT & 503352) PAN KIT 503841 51040 503352 65917 50131 50177 61974 54136 55687 60034 50177 503141 54136 66529 66591 60498 66587 WELLS...

  • Page 16: Wiring Diagram

    WIRING DIAGRAM...
  • Page 17 NOTES...

  • Page 18: Parts & Service

    PARTS & SERVICE DESCRIPTION PART NO. Always use an inset. DO NOT place food directly ADAPTERS & INSETS into the warmer pan. ADAPTER TOP, convert 12” x 20” warmer to hold two 7 qt. insets 21502 ADAPTER TOP, convert 12” x 20” warmer to hold two 4 qt.

  • Page 19: Customer Service Data

    1¾” thick 22592* contact your Wells authorized service agency, or call: WELLSLOK EXTENSION KIT, for UL LISTED 12” x 20” warmers only, adapt to wood counter Wells Bloomfield, LLC up to 1¾”...
  • Page 20 Commercial Food Equipment Service Association Wells Bloomfield proudly supports CFESA Commercial Food Equipment Service Association SERVICE TRAINING - QUALITY SERVICE SERVICE TRAINING - QUALITY SERVICE Genuine Parts Protect - YOU - All - Ways CUSTOMER SATISFACTION CUSTOMER SATISFACTION WELLS BLOOMFIELD, LLC 10 Sunnen Drive P.O.Box 430195...

This manual is also suitable for:

Mod-300tdmn/afMod-327tdm/af

Table of Contents