FUTABA GY520 Instruction Manual page 24

GY520 P
Parameter 6: Data Reset [6 FLASHES]
Restores the gyro to the factory default settings. It will be necessary
to reprogram all parameters again before fl ying the model.
PARAMETER
1. Servo Type
2. Gyro Compensation Direction
3. Servo Limits
4. Flight Mode
5. Gyro Response
To perform the Data Reset:
Quickly press and release the button on the gyro. The gyro LED will
begin fl ashing quickly requesting confi rmation of the Data Reset. To
confi rm the Data Reset the gyro button must be quickly pressed and
released 3 times, within 2 seconds. Once the data reset is performed
the gyro will automatically return to the Servo Type Selection [Blue,
1 Flash] parameter.
Exiting Programming Mode:
Once you have completed setting up the parameters simply turn the
receiver power off.
Y520 Mnl.indd 24 Y520 Mnl.indd 24
ROGRAMMING
Digital 1520μS
Normal
100% / 100%
F3C
Standard
24
DEFAULT SETTING
4/7/2009 7:55:06 AM 4/7/2009 7:55:06 AM