FUTABA GY502 Instruction Manual page 18

D S
ATA ETTING
18
Gain Tracking
Initial value : +0%
Adjusts left and right tail braking tracking. Setting range is -20% to
+20%.
For example, when there is a sense of hunting when stopping left
pirouette or the helicopter drifts when stopping right pirouette, shift
Trk in the + direction. In the opposite case, shift Trk in the - direc-
tion.
Operation Mode Setting
Initial : CMT
Sets the gyro operation mode. Settings are NOR, AVC, and CMT. In
the NOR mode, both G1 and G2 operate in the AVCS mode. In the
CMT mode, G1 operates in the AVCS mode and G2 operates in the
NOR mode. In the NOR mode, the GY502 operates the same as an
ordinary gyro. In the AVC mode, the GY502 always operates in the
AVCS mode. In the CM mode, the GY502 can be used in both the
AVCS and NOR modes.