Page 1
Securing your and keeping out mosquitoes, leaves and debris is a critical step in successful rainwater TASS20 200mm collection. TATS11 300mm A Tank Screen is fundamental to achieving just that. Global The fine (955 micron) mesh screen keeps out what...
Installation WHAT'S IN THE BOX? TOOLS/MATERIALS YOU MAY REQUIRE Tank Screen Screws Screwdriver or drill TANK SCREEN 1 - If you already have a tank screen installed, remove it prior to installing the new tank screen. 2 - Place the Tank Screen into the inlet hole of the tank, making sure it is approximately centred in the hole, and that the rim of the tank screen covers the inlet fully.
Maintenance You should regularly inspect your Tank Screen and remove any leaves or debris. For a more thorough clean, unscrew your Tank Screen and hose it off before reattaching to your tank. We recommend covering the hole in your tank while cleaning the screen to prevent mosquitoes getting in. For even easier maintenance, consider using a Maintenance Tray –...
Page 5
For more information or to find out how we can help, just give us a call on +61 7 3248 9600 Or visit our website at rainharvesting.com...
Need help?
Do you have a question about the TATS11 and is the answer not in the manual?
Questions and answers