Tacx FLUX S Smart Manual
Also See for FLUX S Smart:

Advertisement

Tacx FLUX S Smart Manual

Assembly

  1. Check if everything is in the package
    Assembly - Step 1 - Check the product contents
  2. Lay the trainer down on its side
    Assembly - Step 2 - Lay trainer down on its side
  3. Place the cassette on the body by aligning the markers
    Please consult the Tacs website for an updated list with fitting cassettes.
    Assembly - Step 3 - Place the cassette on the body
  4. Mount the cassette according to the instructions provided in the manual of the cassette
  5. Slide the front leg in the trainer and fix it with the 2 bolts
    Assembly - Step 4 - Slide front leg in the trainer
  6. Place the trainer on a firm, level surface
    Assembly - Step 5 - Place the trainer on a surface
  7. Select the needed quick release. Place the T2835 for 142x12 or 148x12 mm axles according to the instructions supplied with the axles. Use the fill ring in case of axle length 135 mm
    Assembly - Step 6 - Select needed quick release

Quick release for 142x12mm and 148x12mm sold separately, check the Tacx website

  1. Place the bike in the trainer
    Assembly - Step 7 - Place the bike in the trainer


Disk surface can be hot. Do not touch when operating.
Safety warning about the hot surface of a product

Specifications

Wireless Protocol: Bluetooth 4.0 & ANT+
Frequency range 2400-2483,5 MHz
RF Output Power 5 dBm (typical)
Temperature Range Operational -20°C to+ 55°C
Transmit Range 10 m
Power supply Only use supplied power cord

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Tacx FLUX S Smart Manual

Advertisement

Need help?

Need help?

Do you have a question about the FLUX S Smart and is the answer not in the manual?

Questions and answers

Table of Contents