Tacx NEO Smart T2800 Quick Start Guide

Tacx NEO Smart T2800 Quick Start Guide

Advertisement

Tacx NEO Smart T2800 Quick Start Guide

Assembly

  1. Check if everything is in the package
  2. Lay the trainer down on its side
    Lay the trainer down on its side
  3. Determine the needed connector based on the cassette
    Determine the needed connector based on the cassette

Cassette not included! Campagnolo: other body required, available at Tacx webshop.

Please consult the Tacx website for an updated list with fitting cassettes.

  1. Mount the cassette according to the instructions provided in the manual of the cassette
  2. Unfold the trainer and place it on a firm, level surface
    Unfold the trainer and place it on a firm, level surface
  3. Place the bike in the trainer
    Place the bike in the trainer
  4. Choose to train with or without mains power
  5. Fold the trainer to store it
    Fold the trainer to store it

Troubleshooting

Problem A: the derailleur hits the NEO when using the lightest gear

  1. Remove the Body including the cassette with an allen key 5mm. Make sure the black ring remains attached to the Body.
    Remove the Body including the cassette
  2. Slide the 2 supplied spacers (T2805.11 and T2805.12) to the back of the axle.
    Slide the 2 supplied spacers to the back of the axle
  3. Place the Body, with the black ring, and the cassette back in position.
    Place the Body back in position

Videos

Tacx NEO Smart T2800 Review Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Tacx NEO Smart T2800 Quick Start Guide

Advertisement

Need Assistance?

Do you have a question about the NEO Smart that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents