Using Rechargeable Batteries - AKG FLEXX GUITARBUG GB 40 User Instructions

Guitarbug
Hide thumbs Also See for FLEXX GUITARBUG GB 40:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
Fig. 2: Inserting a battery.
14
As long as the battery is in good con dition, the
status LED (4) will flash red momentar ily and
will then be lit green constantly.
If the status LED (4) lights red constantly the
battery will be dead within about 60 minutes.
Replace the battery with a new one as soon as
possible.
If the status LED (4) fails to flash momentarily
the battery is dead. Insert a new battery.
6. Slide the battery compartment lid (1) onto the
transmitter against the direction of the arrow to
the point that the lid (1) will click shut.

3.2 Using Rechargeable Batteries)

Instead of dry batteries, you can also use a 1.2-V
rechargeable battery to power the transmitter. We
recommend SANYO HR-4U (650 mAh) or Pana-
sonic Rechargeable PRO+ (550 mAh) NiMH re-
chargeable batteries.
Note: If you use a rechargeable battery, the LED
will switch to red 15 to 20 minutes before the
battery will be dead!
GB 40 FLEXX guitarbug

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gb 40 flexx guitarbugGb 40 flexx

Table of Contents