Generator automatic voltage regulator.
universal 16amp self excited automatic voltage regulator
for use in 220 / 380 / 440 / 480 vac brushless generators
with paralleling compatibility (6 pages)
For safety do not touch the heat sink while in operation. 4. Fuse specification : 16A / 250V slow blow type. 5. Terminal:"Fast-On" terminals 6.35mm (1/4 inch) & With 4mm crimping terminal. UNIT : mm Figure 1 Outline Drawing ______________________________________________________________________________________ EA16-400Hz...
10%. The signal overload. connected to A1 and A2 can be unipolar (0,+) or bipolar (+,−). Check with the manufacture of the Paralleling control PLC. ______________________________________________________________________________________ EA16-400Hz...
(F+ and F−), apply a DC Voltage using a batteries positive terminal to F+ and the negative terminal to F−, using a current-limiting resistor of 3~5 ohms 20 watt. 2. Allow approximately 3 seconds before removing the battery. ______________________________________________________________________________________ EA16-400Hz...
Inquire our distributor to solve the rang of regulator ※ Use only original supplied spare protection fuse for fuse replacement. ※ Please accept our sincere apology if any modification in performance, specification or appearance is made without prior notice. ______________________________________________________________________________________ EA16-400Hz...
Need help?
Do you have a question about the EA16-400Hz and is the answer not in the manual?
Questions and answers