Advertisement
Quick Links
EA321
Generator Automatic Voltage Regulator
Operation Manual
Use with PMG brushless generators
Compatible with Newage MX321*
* All manufacturer names and numbers are used for reference purpose only
and do not imply that any part is the product of these manufacturer.
KUTAI ELECTRONICS INDUSTRY CO., LTD.
TEL : +886-7-8121771
FAX : +886-7-8121775
Website : www.kutai.com.tw
Headquarters : No.3, Ln. 201, Qianfu St., Qianzhen Dist., Kaohsiung City 80664, Taiwan
Advertisement
Related Manuals for Kutai electronics EA321
Summary of Contents for Kutai electronics EA321
- Page 1 Compatible with Newage MX321* * All manufacturer names and numbers are used for reference purpose only and do not imply that any part is the product of these manufacturer. KUTAI ELECTRONICS INDUSTRY CO., LTD. TEL : +886-7-8121771 FAX : +886-7-8121775 Website : www.kutai.com.tw...
-
Page 2: Section 1 : Specification
Max.18 watts Vibration Quadrature Droop Input Dimensions Burden 10 ohms 203.5 (L) x 153.6 (W) x 43.5 (H) mm Max. input 0.33 A Max. sensitivity 0.22 A for 5% droop (PF = 0) Weight 530 g +/- 2% ___________________________________________________________________________________________ EA321... -
Page 3: Section 2 : General Description
SECTION 2 : GENERAL DESCRIPTION Provision is made for the connection of a remote voltage trimmer, allowing the user fine control of EA321 is a three phase sensed Automatic the generator’s output. Voltage Regulator and forms part of the excitation system for a brush-less generator. -
Page 4: Section 4 : Adjustment Of Avr Controls
KW rating of the a controller. generator. The correct setting of the Stability adjustment can be found by running the generator at no load and slowly turning the stability control anti-clockwise until the generator ___________________________________________________________________________________________ EA321... -
Page 5: Section 5 : Fitting And Operating
DROOP VOLTS unstable under with changes in load. Avoid making I/LIMIT TRIM any changes to the U/F setting unless necessary. 5. Set the O/E potemtiometer at max. position when paralleling. Figure 1 Outline Drawing ___________________________________________________________________________________________ EA321... - Page 6 Volts Ramp No link 6P50HZ 6P60HZ I Limit 4P50HZ 4P60HZ UFRO Frequency Selection Indicator EA321 Dwell Stability >550KW 90-550KW <90KW Stability Selection Droop Over V Exc. B0 B1 Trim Figure 2 Disposition Drawing 3 Bridge Exciter 220V Generator E0 E1...