Programming The 4D Mouse And Lens Cursor; Using Your 4D Mouse As A 15-Button Mouse - Wacom INTUOS - FOR MACINTOSH User Manual

Programming the 4D Mouse and Lens Cursor

As with the Intuos Pen and Airbrush, you can select a function to perform for each button from the button
pull-down menus. Refer to
The 4D Mouse and Lens Cursor buttons are chordable; you can press two or more buttons simultaneously
and the functions will occur. For example, if you program one button to simulate the C
to simulate a Z keystroke, when you press both buttons a C

Using Your 4D Mouse as a 15-Button Mouse

You can transform your 4D Mouse into a 15 button mouse. In that configuration, each button can be
customized to perform three different functions depending on the thumbwheel position. To program the
additional button settings:
1. Choose the T
HUMBWHEEL
2. Return to the T
OOL
3. Select F , C
ORWARD
displayed in the button pull-down menus will change as you select between the radio buttons. Define
functions for each of the five buttons in the following manner:
• Select F
ORWARD
• Select C
ENTER
• Select B , then choose a button option from the pull-down menu(s).
ACK
To activate an alternate button function, push the thumbwheel forward or backward, respectively, before
pressing the button.
Button Functions
tab and select 15-
B tab—the 15 button 4D Mouse settings will be enabled.
UTTONS
, or B to choose between the three sets of button functions. The options
ENTER ACK
, then choose a button option from the pull-down menu(s).
, then choose a button option from the pull-down menu(s).
Contents
Index
for a description of the available options.
+Z is simulated.
TRL
4D M
BUTTON OUSE
TRL
.
key and another
CUSTOMIZING
Page 77