Using The Lens Cursor - Wacom INTUOS - FOR MACINTOSH User Manual

USING THE LENS CURSOR

The Intuos Lens Cursor is an ergonomic input device that allows you to enter precise coordinate position
information into your computer. The Lens Cursor reports the position of the cross-hair to the computer.
This makes the Lens Cursor especially useful for tracing and digitizing drawings into graphics and CAD
applications. By default, the Lens Cursor is set to M
cursor like you do with a regular mouse. When using the Lens Cursor to digitize a drawing, the Lens
Cursor must be set to P
Double-Click Button
Click Button
Refer to Customizing the 4D Mouse and Lens Cursor
buttons.
M .
EN ODE
Rotate lens for best viewing angle.
Contents
Index
M , which means you can position the screen
OUSE ODE
Simulates a C +
TRL CLICK
Rear Buttons are ignored by default.
for information on programming the Lens Cursor
by default.
Important: When the Lens Cursor
is not in use, place it on your desk.
Leaving an Intuos tool on the
tablet may interfere with screen
cursor positioning when using
other pointing devices.
USING INTUOS
Page 44