Wacom INTUOS - FOR MACINTOSH User Manual page 122

• Then press the tool's eraser to the tablet—the S
(P should change from approximately 0% with no pressure applied to approximately 100%
RESSURE
when full pressure is applied.)
• For the airbrush, move the fingerwheel forward—the W
approximately 0 when the fingerwheel is all the way forward. Move the fingerwheel backward—the
W value should increase to approximately 1000 when the fingerwheel is all the way back.
HEEL
4. Test tilt for the x-axis by moving the Intuos Pen or Airbrush from a vertical position toward the right; the
X T value should change from approximately 0 to +60 (0 to +50 for Intuos 4x5 tablets). Now move
ILT
the tool to the left of vertical; the X T
Intuos 4x5 tablets).
5. Test tilt for the y-axis by moving the Intuos Pen or Airbrush from a vertical position toward the bottom of
the tablet; the Y T
Now move the tool toward the top of the tablet; the Y T
-60 (0 to -50 for Intuos 4x5 tablets).
6. When you are done, click on the C
ILT
value should change from approximately 0 to +60 (0 to +50 for Intuos 4x5 tablets).
ILT
LOSE
Contents
Index
WITCHES
HEEL
value should change from approximately 0 to -60 (0 to -50 for
value should change from approximately 0 to
ILT
button to exit the dialog box.
state and P
RESSURE
value should decrease to a value of
HAVING TROUBLE?
value will change.
Page 122