Turtle Beach ATOM Manual

Also See for ATOM:

Quick start manual (16 pages)

Quick start manual (16 pages)

Table of Contents

Contents

1 CONTENTS
2 CONTROLS
3 ATTACHING SMARTPHONE
4 POWERING ATOM ON/OFF
5 SETUP FOR BLUETOOTH
6 CHARGING ATOM
7 CHARGING ATOM - LED INDICATIONS
8 Documents / Resources
- 8.1 References
- 8.2 Download manual

Turtle Beach ATOM Manual

CONTROLS

ATTACHING SMARTPHONE

SEPARATE THE LEFT AND RIGHT MODULES
RAISE THE CLAMPS TO THE REQUIRED HEIGHT
SECURELY ATTACH YOUR SMARTPHONE TO THE ATOM CONTROLLER MODULES. SMARTPHONES WITH DEPTHS BETWEEN 67-92mm, AND HEIGHTS OF 6-10.5mm ARE SUPPORTED.

POWERING ATOM ON/OFF

PRESS THE HOME BUTTON FOR 2 SECONDS TO POWER ON THE LEFT MODULE. PRESS THE MENU BUTTON FOR 2 SECONDS TO POWER ON THE RIGHT MODULE.

SETUP FOR BLUETOOTH®

PRESS PAIRING BUTTON
ENABLE BLUETOOTH AND TAP THE DEVICE ENTRY TO PAIR

CHARGING ATOM

BOTH MODULES MUST BE JOINED IN TRAVEL MODE FOR CHARGING. IN THIS MODE, THE CONTROLLER WILL NOT POWER ON. CHARGE THE CONTROLLER USING THE SUPPLIED USB-C CABLE.
CHARGING ATOM

CHARGING ATOM - LED INDICATIONS

Atom state	LED: main connection	LED: left module	LED: right module
Atom off	Off	Off	Off
Atom off: charging	Off	Red breathing, 5 second pulse, 5 seconds off	Red breathing, 5 second pulse, 5 seconds off
Atom off: fully charged	Off	Solid green	Solid green
Atom on: looking for paired device	White flash once per second	Blue flash once per second	Blue flash once per second
Atom on: pairing mode	White flash twice per second	Blue flash twice per second	Blue flash twice per second
Atom on: connected	White on at 100% brightness then drop to 30% after 1 minute	White on at 100% brightness then drop to 30% after 1 minute	White on at 100% brightness then drop to 30% after 1 minute
Atom on: low battery	White on at 100% brightness then drop to 30% after 1 minute	Red flash. On one second per 10 seconds	Red flash. On one second per 10 seconds