Holding The Pen - Wacom GRAPHIRE CTE-630BT User Manual

HOLDING THE PEN

Hold the Graphire pen like you would a normal pen or pencil. Make sure the DuoSwitch is in a convenient
location where you can toggle it with your thumb or forefinger, but not accidently press the switch while
drawing or navigating with the pen. You can tilt the pen in any way that feels most comfortable.
Position for drawing and navigating.
Use the pen stand to store the pen between
tasks. This makes the pen available for quick,
easy access when you are working.
Important: When the pen is not in use, place it in the pen storage compartment, the pen stand, or
lay it flat on your desk. To maintain the sensitivity of your pen, do not store the pen in a container
where it will rest on its tip or eraser. Leaving a Graphire tool on the tablet may interfere with screen
cursor positioning when using other pointing devices. Also, leaving the pen on the tablet when not
in use can prevent the tablet from switching off and cause the battery to drain down.
Contents
Index
Contents Index
Position for erasing.
Your tablet also comes with an
integrated pen storage
compartment. When you are not
using the pen, you can reach
behind the tablet and press the pen
into the storage compartment or
lay it flat on your desk.
19
19