V-TAC VT-5184 Installation Instruction

Led smart dome light

Advertisement

TECHNICAL DATA
MODEL
VT-5184
WATTS
LUMENS
2400LM
BEAM ANGLE
SPHERE 360° SPHERE 360°
CRI
DF
Plas�c(PMMA)+Metal(Iron)
MATERIAL
INPUT POWER
DIMENSION
ø310x55mm
OPERATION
TEMPERATURE
Thank you for selec�ng and buying V-TAC SMART LED Ligh�ng. V-TAC will serve you the best.
Please read these instruc�ons carefully before star�ng the installa�on and keep this manual
handy for future reference. If you have any other query, please contact our dealer or local vendor
from whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does not apply to
damage caused by incorrect installa�on or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installa�on of the product.
The products are suitable for 10-12 Hours Daily opera�on. Usage of product for 24 Hours a day
would void the warranty. This product is warranted for manufacturing defects only.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
INSTALLATION INSTRUCTION
LED V-TAC SMART DOME LIGHT
VT-5138
24W
36W
3600LM
80
80
0.7
0.9
AC:220-240V, 50/60Hz
ø350x55mm
-20°C to +40°C
Ok Google
INTRODUCTION & WARRANTY
works with
WEEE Number: 80133970
2
WARRANTY
*

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VT-5184 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for V-TAC VT-5184

  • Page 1 WARRANTY INTRODUCTION & WARRANTY Thank you for selec�ng and buying V-TAC SMART LED Ligh�ng. V-TAC will serve you the best. Please read these instruc�ons carefully before star�ng the installa�on and keep this manual handy for future reference. If you have any other query, please contact our dealer or local vendor from whom you have purchased the product.
  • Page 2: Safety Warning

    SAFETY WARNING 1. Please make sure to turn off the power before star�ng the installa�on. 2. Installa�on should only be done by a cer�fied electrician. 3. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
  • Page 3: Installation Diagram

    INSTALLATION DIAGRAM...
  • Page 4: App Installation

    INSTALLATION DIAGRAM For ANDROID For IOS APP INSTALLATION Step 1: Scan the given QR code, or download “V-TAC Smart Light” from the App Store (iOS) or the Google Play Store (Android).
  • Page 5 Step 3: Step 2: Open the V-TAC Smart Light app and A) Mobile Number: Select the country, then enter tap on register for crea�ng a new account. your mobile number. Once done, tap ‘Next’. B) E-Mail: Enter your email id and tap on ‘Next’.
  • Page 6 Step 6: Choose ‘Ligh�ng’ to start pairing the luminaire to the app. Step 7: To pair the device with luminaire make sure the light is blinks rapidly. Once the light blinks rapidly, the luminaire is in pairing mode. If the bulb is not blinking rapidly, you can do one of the following steps: A.
  • Page 7 Step 9: Once your device is successfully Step 8: Once you have successfully completed added, rename the device to your step 7, you will be redirected to below page, preference. where the App searches, registers and ini�alizes the device (ref image below). Step 10: A�er successfully pairing the smart device with the app, you can start controlling mul�ple features of the luminaire through your mobile–...
  • Page 8 Amazon Alexa, please proceed to logging in. Step 3: Tap on se�ngs and tap on Step 4: Search for ‘V-TAC Smart Light’ on the “Skills & Games” page as shown below. “skills and games” as shown below.
  • Page 9 Step 6: Enter your V-TAC Smart Light login Step 5: Enable the Skill. ID and password and tap on “Link Now” Step 8: You will receive confirma�on of the Step 7: Once you tap on Link Now, you will be account being linked successfully redirected to a new page reques�ng for...
  • Page 10 ! Alexa, set bedroom light to warm white. THINGS TO REMEMBER BEFORE STARTING INSTALLATION: 1. V-TAC Smart Light App & Amazon Alexa App 2. Make sure you have Amazon Alexa Device(including Echo, Echo Tap, or Echo Dot) 3. Smart Device...
  • Page 11 GOOGLE HOME SETTINGS Step 1: a&b) Install the Google Home app via the App Store (iOS) or the Play Store (Android) and register. If you already have an exis�ng account with Google Home, please proceed to logging in. c) Create a New Home/Choose from the exis�ng home if any. d) Power ON the Google Home device and connect it to the App.(Then Proceed to step 2) Step 2: Once you are on the Google home page, tap on the Add “+”...
  • Page 12 Step 3: Make sure the Smart Dome Light is paired Step 4: Type “V-TAC Smart Light” on the search with V-TAC Smart Light app before star�ng bar and tap on the icon of “V-TAC Smart Light” step 3. Tap on the arrow sec�on as highlighted in the below image.
  • Page 13 Step 7 a. Account will now be linked, please stay on the page you will be redirected in few seconds to select the device to add to your home. b. Select the device and tap on Next as show in image b. Account is now Linked Step 8: Select the Home where you would like to Step 9: You have succesfully added Smart Light...
  • Page 14 Ok, Google, set bedroom light to green. ! Ok, Google, set bedroom light to warm white. THINGS TO REMEMBER BEFORE STARTING INSTALLATION: 1. V-TAC Smart Light App & Google Home App 2. Make sure you have Google Home Device 3. Smart Device...

This manual is also suitable for:

Vt-5138

Table of Contents