Cd Player; Selecting Cd Player; Loading Cd Disc; Play And Pause Playback - GE Spacemaker 7-5330 User Manual

CD Player

Selecting CD Player

Press PLAY PAUSE to select CD player.

Loading CD Disc

EN
1. Press the OPEN CLOSE button to open the
disc tray.
2. Insert CD disc with label side facing up.
3. Press OPEN CLOSE again to close the disc
tray.

Play and Pause Playback

Press PLAY PAUSE to start playback.
Press again to pause. The track number will flash
when in pause mode.
Press again to resume.
Note: Note: Note: Note: Note:
If no disc is in the disc compartment nd will
show on the display.
11

Skip and Search Tracks

Press TRACK / SEARCH / TUNE to go to the
previous track.
Press and hold to quick search backwards
through a track.
Press TRACK / SEARCH / TUNE to go to the
next track.
Press and hold to quick search forward through a
track.

End Playback

Press STOP to end playback.

Repeat and Random Playback

Press CD MODE on the remote control
repeatedly to select among playback modes.
- Repeat track
- Repeat disc
- Random playback
- Repeating all tracks on the disc in
random order

Using the Countertop Light

The countertop light switch is located on the side
of the unit, and has three settings: HI, LO, and
OFF.
• For dimmer light, move the light switch to
the LO position.
• For more illumination, switch to HI.
• To turn the light off, place Light switch to
OFF.

Replacing the Bulb

1. Unplug the unit cord from the AC power
outlet.
2. Unlatch the cover to open it.
3. Unscrew and remove the bulb.
4. Install the replacement bulb.
5. Swing the cover up and snap it in place.
6. Plug the cord into the AC outlet.

Display Brightness

In standby mode, press VOL - or + to select
display brightness level (bright (normal) / dim /
dimmer)
DISC PLAYER
OFF RADIO CD
EN
er
Caution: Caution:
Caution: Caution: Caution:
Use only appliance-type bulb with a
maximum of 40-watt or equivalent
for replacement. To prevent hazard, do not
operate light without the cover.
12