Linksys WAP55AG - Wireless A+G Access Point User Manual page 24

Dual-Band Wireless A + G Access Point
Wireless
• Basic Wireless Settings. The selections under this heading allow you to configure the Access Point's
connection of your Wireless-A (802.11a) and Wireless-G (802.11g) networks.
• Wireless Security. The Wireless Security settings configure the security of your wireless network.
• Wireless MAC Filter. Wireless access can be filtered by using the MAC addresses of the wireless devices.
• Advanced Wireless Settings. These are advanced wireless settings. In most cases, these settings do not need
to be changed.
Administration
• Password. The Password screen allows you to change the Access Point's password.
• Log. The Access Point can keep logs of wireless activity.
• Factory Defaults.This screen allows you to restore the Access Point's configuration to its factory default
settings.
• Firmware Upgrade. This screen allows you to upgrade the Access Point's firmware. Do not upgrade the
firmware unless you are experiencing problems with the Access Point or the new firmware has a feature you
want to use.
Status
• Local Network. The Status tab displays the current status of the Access Point's local network.
• Wireless. The Wireless screen on the Status Tab displays the status of your Wireless-A and/or Wireless-G
networks.
Chapter 6: Configuring the Dual-Band Wireless A + G Access Point
Navigating the Utility
18