Shark AI ULTRA, 2600WA Series Manual

Robot Setup

1. Set Up Base + Landing Mat
   
   • Remove protective film from the robot and base.
   • Snap together the pieces of the landing mat.
   • Place the base on top of the landing mat, in a location with a strong Wi-Fi signal.
2. Attach Side Brush
   
   • Note: Side brush design may vary.
3. Place Robot on Base
   
4. Scan the QR code to download the SharkClean^® app.
   • Complete your robot setup process in the app and learn about mopping mode.
   • To get the best cleaning performance from your robot, we recommend downloading the latest version of the SharkClean^® app.

App Features

• UltraClean
• Mapping
• Scheduling
• No-Go Zones
• Carpet Zones
• Spot Cleaning

What's Included

Self-Empty Base
Holds 60 days' worth of debris.

Self-Empty Dust Bin
Enables Self-Empty feature for dry vacuuming.
Note: the Self-Empty Dust Bin comes pre-inserted in the robot.

Mopping Pad
Reusable mopping pad for vacuuming and mopping mode.

Landing Mat
Sits under the Self-Empty Base and robot.

VAC & MOP 2-in-1 Dust Bin
Enables mopping mode while holding dry debris from vacuuming.
Note: The VAC & MOP 2-in-1 Dust Bin will not self-empty. It will require manual cleaning after use.

VACMOP™ Bottle
TM 2-liter refill bottles available for purchase on sharkclean.com

Maximize Your Robot Experience

Tips and tricks for getting the most out of your robot.

• To manually turn ON/OFF your robot, hold down the DOCK button for 6-8 seconds.
• Clear the area of cords and wires before each clean.
• Use mopping mode for daily maintenance and stuck-on messes.
• Only use Shark^® VACMOP™ cleaning solution or water when mopping.
• Always place your robot on a level surface when performing maintenance.
• Clean brushroll and filter regularly.