Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Danfoss DEVIpipeguard 30 Industry
Summary of Contents for Danfoss DEVIpipeguard 30 Industry
- Page 1 Installation guide Connection kit for DEVIpipeguard™ 30/60 Industry...
-
Page 3: Connection Kit
INSTALLATION GUIDE Connection kit for DEVIpipeguard™ 30/60 Industry Connection kit Content: 1.: 1 × 170 mm heat-shrink tube, black 33/5.5 2.: 1 × Shrink-on end cap, black 3.: 1 × 20 mm heat-shrink tube, black 12/3 4.: 1 × clamping block 5x2.5mm² 660V 5.: 1 ×... - Page 4 INSTALLATION GUIDE Connection kit for DEVIpipeguard™ 30/60 Industry Heating cable end termination Cut the end of the heating cable straight. Cut o the outer sheath and CU braiding approx. 20 mm from the end, do not damage the 20 mm inner insulation.
-
Page 5: General Installation Instructions
INSTALLATION GUIDE Connection kit for DEVIpipeguard™ 30/60 Industry General installation instructions: • Unroll the heating cable from the ring and cut it to the required length. • Strip the end and attach it to the pipe with a shrink cap as described above. •... - Page 6 INSTALLATION GUIDE Connection kit for DEVIpipeguard™ 30/60 Industry Heating tape connection Cut the heating cable to the re- quired length (observe the maxi- mum permissible length). Remove outer protective cover 30 mm. The speci ed dimensions must be 30 mm observed.
- Page 7 INSTALLATION GUIDE Connection kit for DEVIpipeguard™ 30/60 Industry Cut connecting cable H 07RN-F 3 ×1.5 mm² to the required length. Remove 20 mm of outer insulation from the connecting cable. Strip approx. 8 mm of the exposed wire. Attach wire end ferrules. Connect the heating cable and supply cable to each other via the clamping body.
-
Page 8: Warranty Certificate
DEVIwarranty shall not extend to products which able for any consequential or incidental damages in- have not been paid in full. Danfoss will, at all times, cluding, but not limited to, damages to property or provide a rapid and e ective response to all com- extra utility expenses. - Page 9 INSTALLATION GUIDE Connection kit for DEVIpipeguard™ 30/60 Industry...
- Page 10 INSTALLATION GUIDE Connection kit for DEVIpipeguard™ 30/60 Industry...
- Page 11 INSTALLATION GUIDE Connection kit for DEVIpipeguard™ 30/60 Industry...
- Page 12 INSTALLATION GUIDE Connection kit for DEVIpipeguard™ 30/60 Industry Danfoss A/S Nordborgvej 81 6430 Nordborg, Syddanmark Denmark 08090348 | AN460845180865en-010101 Produced by Danfoss © 2024.03...
Need help?
Do you have a question about the DEVIpipeguard 30 Industry and is the answer not in the manual?
Questions and answers