Maintenance; Disposal - Siemens Acvatix SAY Series Basic Documentation

Siemens
Smart Infrastructure
Set address "50":
1. Enable addressing mode
2. Skip over 1st digit: Press button until LED is
3. Enter the 2nd digit: Press button 5x → LED blinks
pressed
4. Save address (skip 3rd digit): Press button until LED is
→ The address is saved and displayed 1x for confirmation
Set address "5":
1. Enable addressing mode
2. Enter the 1st digit: Press button 5x → LED blinks
pressed
Save address: Press button until LED is
→ The address is saved and displayed 1x for confirmation

Maintenance

3.2.3
The actuators are maintenance-free.

Disposal

3.2.4
The device is considered electrical and electronic equipment for
disposal in terms of the applicable European Directive and may not
be disposed of as domestic garbage.
•
Dispose of the device through channels provided for this
purpose.
•
Comply with all local and currently applicable laws and
regulations.
Actuators SAX.., SAY.., SAV.., SAL.. for valves
Handling
green – release button
green each time the button is
red – release button
red each time the button is
red – release button
59 / 100
CE1P4040en
2024-04-11