Page 1
HOMEDEPOT.COM/GLACIERBAY THANK YOU We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this kitchen faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that prove defective.
Page 3
Pre-Installation (continued) PACKAGE CONTENTS NOTE: *Items come pre-assembled. Part Description Quantity Part Description Quantity Faucet body Outlet hose Pull-down spray Water supply line Deck plate Base insert Gasket Base Pull-down spray hose Allen wrench (H4mm * 24mm L * 74mm L) Rubber weight Allen wrench (H2.5mm * 11mm L * 53mm L)
Installation Installing the faucet without Installing the faucet assembly the deck plate Shut off the water supply. Remove the old faucet. Rotate the two half-moon locking nuts (2) inward before inserting the base (K) into the sink. Clean the mounting surface. Insert the base (K) into the sink.
Page 5
Installation (continued) Tightening the base Inserting the hose Use one hand to hold the base (K) and the second Remove the quick connector (G) from the hose (E). hand to tighten the two screws with the allen Insert the hose (E) through the small hole of the wrench (L) until the locking nuts secure the base base (K).
Installation (continued) Securing the faucet body Attaching the quick connector Remove the cap from the outlet hose (H). Align the arrow on the faucet body (A) with the arrow on the base (K). Attach the faucet body (A) Reattach the quick connector (G) to the hose (E). to the base (K) and turn counterclockwise until it locks.
Installation (continued) Attaching the weight Checking for leaks The pull-down spray (B) should be nested in the Detach the pull-down spray (B) from the pull-down faucet body (A). spray hose (E). Hold the pull-down spray hose (E) firm to prevent it from retracting into the faucet Use a Phillips screwdriver to secure the weight (F) body (A).
Care and Cleaning This faucet is designed for years of trouble-free performance. Keep it looking new by doing the following: Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the finish and void your warranty. Troubleshooting NOTE: Refer to the service parts section in this manual for a detailed drawing showing the location of the parts listed...
Service Parts DO NOT REMOVE DATE CODE: 1-888-328-2383 Faucet ID Tags can be found on the hot supply line Part Description Part No. Part Description Part No. Handle Cap Assembly A66D558 Hose Adaptor Assembly A663123N Metal Handle A069754 Weight A504713 Trim Cap A103016 Spray Hose...
Page 10
Questions, problems, missing parts? Before returning to the store, call Glacier Bay Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-GLACIER HOMEDEPOT.COM/GLACIERBAY Retain this manual for future use.
Page 11
HOMEDEPOT.COM/GLACIERBAY MERCI Nous apprécions la confiance que vous avez placée dans Glacier Bay par l’achat de ce robinet de cuisine. Nous nous efforçons continuellement de créer des produits de qualité conçus pour améliorer votre maison. Visitez-nous en ligne pour voir notre gamme complète de produits disponibles pour vos besoins de rénovation. Merci d’avoir choisi Glacier Bay!
GARANTIE À VIE LIMITÉE Les produits Glacier Bay sont fabriqués avec des normes de qualité supérieure et sont soutenus par notre garantie à vie limitée. Les produits Glacier Bay sont garanties à l’acheteur original d’être exempt de vices de matériaux ou de fabrication.
Page 13
Pré-installation (suite) CONTENU DE L’EMBALLAGE REMARQUE : *Les articles sont préassemblés. Pièce Description Quantité Pièce Description Quantité Corps du robinet Boyau d’évacuation Douchette rétractable Conduite d’alimentation en eau Plaque décorative Pièce rapportée d’embase Joint Embase Tuyau de douchette rétracta- Clé allen (H4mm * 24mm L * 74mmL) Poids en caoutchouc Clé...
Installation Installation du robinet sans Installation du robinet la plaque décorative Désactivez l’alimentation en eau. Enlever le vieux robinet. Tournez les deux écrous de verrouillage en demi-lune (2) vers l’intérieur avant d’insérer la base (K) dans Nettoyer la surface de montage. l’évier.
Page 15
Installation (suite) Serrage de l’embase Mise en place du flexible Utilisez une main pour tenir la base (I) et la Retirez le raccord rapide (G) du flexible (E). seconde main pour serrer les deux vis avec la clé hexagonale (L) jusqu’à ce que les écrous Insérez le flexible (E) dans le petit trou de de verrouillage fixent solidement la base sur l’embase (K).
Page 16
Installation (suite) Fixation du corps du robinet Installation du connecteur rapide Alignez la flèche sur le corps du robinet (A) avec la Retirez le capuchon du boyau d’évacuation (H). flèche sur l’embase (K). Fixez le corps du robinet (A) Rattachez le connecteur rapide (G) au flexible (E). sur l’embase (K) et le tournez dans le sens inverse des aiguilles d’une montre jusqu’à...
Installation (suite) Opération Installation du poids Recherche de fuites Le douchette rétractable (B) devrait emboîter dans Enlevez la bec extensible (B) du tuyau de bec exten- le corps de robinet (A). sible (E). Tenez le tuyau de douchetterétractable (E) fermement pour l’empêcher de se rétracter dans le Utilisez un tournevis Phillips pour serrer le poids (F) corps du robinet (A).
Entretien et nettoyage Pour nettoyer, essuyer avec un chiffon humide, puis sécher avec un linge. Ne pas utiliser de nettoyants abrasifs, de laine d’acier ou de produits chimiques puissants pour nettoyer ce robinet, sinon la garantie est annulée. Dépannage REMARQUE : Se reporter à la section des pièces du présent manuel qui comprend un schéma détaillé...
Pièces de rechange DO NOT REMOVE DATE CODE: 1-888-328-2383 Les étiquettes d’identité du robinet se trouvent sur la ligne d’alimentation à l’eau chaude. Pièce Description N° Pièce Pièce Description N° Pièce Assemblage poignée métal- A66D558 Assemblage d´adaptateur A663123N lique de boyau Manette en métal A069754 A504713...
Page 20
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appelez le service à la clientèle de Glacier Bay de 8h à 7h, heure normale de l’Est, du lundi au vendredi de 9h à 6h, heure normale de l’Est, samedi 1-855-HD-GLACIER HOMEDEPOT.COM/GLACIERBAY...
Need help?
Do you have a question about the FP4A0105CP and is the answer not in the manual?
Questions and answers