Download Print this page
Panasonic ET-SFR510C Operating Instructions
Panasonic ET-SFR510C Operating Instructions

Panasonic ET-SFR510C Operating Instructions

Smoke cut filter

Advertisement

Quick Links

Thank you for purchasing this Panasonic product.
■ Carefully read through these operating Instructions and the operating instructions of the
projector to ensure safe and proper operation.
■ Please save this manual for future use.
Ú All the projector illustrations in this manual are based on PT-SDZ21KC model.
Attention
Do not reuse it. The smoke cut filter to be replaced should be an unused product.
Do not wash the smoke cut filter with water.
Please switch the filter type settings of the projector when using this smoke cut filter.
Note
When the filter type is set to [SPECIAL], the fan speed increases and "U75" appears on the
self-diagnosis display on the side of the projector.
This filter can be used for approximately 24 hours in smoky environments.
If it is used for more than approximately 24 hours, operating problems may occur and
inspection or repairs might be required.
Do not use the filter at high altitudes (1 400 m above sea level) or in places where the ambient
temperature is 35°C or higher.
Operating Instructions
Smoke Cut Filter
Model No.
Self-diagnosis
display
ET-SFR510C
Commercial Use
TQZJ433-1

Advertisement

loading
Need help?

Need help?

Do you have a question about the ET-SFR510C and is the answer not in the manual?

Questions and answers

Summary of Contents for Panasonic ET-SFR510C

  • Page 1 Commercial Use ET-SFR510C Model No. Thank you for purchasing this Panasonic product. ■ Carefully read through these operating Instructions and the operating instructions of the projector to ensure safe and proper operation. ■ Please save this manual for future use.
  • Page 2 Attention Turn the main power off before replacing the smoke cut filter. ● Make sure that the projector is stable when attaching the smoke cut filter, and work in an ● environment that is safe, even in the event of the smoke cut filter dropping. Installing the smoke filter 1) Turn off the projector and disconnect the power plug from the wall outlet.
  • Page 3 Installing the smoke filter (Continued) 4) Attach the smoke cut filter to the Area where the air filter unit is stowed (Area where the smoke cut filter is stowed) projector. Catch the smoke cut filter onto the ● two tabs on the back of the area of the projector where the air filter unit is stowed (area where the smoke cut filter is stowed), and install the filter following...
  • Page 4 5) Press <MENU> button to escape from the Menu. „ Disposal When discarding this product, please contact your local authorities or dealer and ask for the correct method of disposal. 日本福冈县福冈市博多区美野岛四丁目1番62号 https://panasonic.cn/ 2022 © 松下互联株式会社 2022版权所有 SS0412AM1042 -PS Printed in Japan...