Adjusting The Hand And Date Positions - Seiko 6M15 Manual

ADJUSTING THE HAND AND DATE POSITIONS

Before setting the time and calendar, be sure to use the Ø CHRONO. mode to check that
the hour, minute and second hands are in the 12 o'clock position and that the date
numeral appears at the center of the calendar frame.
• Turn the crown to set the mode indicator to "Ø CHRONO.".
If the hands do not return to the 12 o'clock position or the date numeral
does not appear at the center of the calendar frame, reset them following the
procedure below.
* When the stopwatch is counting, press "A" to stop measurement and then press
"B" to reset the hands.
Hour hand
A
Second hand
24-hour hand
B
Mode indicator
Minute hand
C
Crown
Extended
( )
position
D
Calendar frame
1. Pull out the crown. The date returns to "1".
* Reset of the hand or date can be made only after the date returns to "1".
* If the date does not return to "1", reset the circuit following the procedure in
"NECESSARY PROCEDURE AFTER BATTERY CHANGE".
2. Press "B", "A" and "C" repeatedly but separately to reset the hour, minute and
second hands to the 12 o'clock position, respectively.
* The hands move quickly if the respective buttons are kept pressed.
* The 24-hour hand moves correspondingly with the hour hand. When resetting the
hour hand, check that the 24-hour hand indicates "24".
3. Press "D" to put the date numeral "1" to the center of the calendar frame.
* By pressing "D", the date moves back and forth repeatedly.
* The date moves quickly if "D" is kept pressed.
4. Push the crown back in to the normal position.