Material Needed; Basic Tools - Kenmore 3314 - Power Miser 12 Owner's Manual

Materials Needed
To simplify the installation Sears has available the installation parts shown below. You may or may not need al! of these materials,
depending on your type of installation.
EXPANSION TANKS FOR
THERMAL EXPANSION
CONDITIONS AVAILABLE
IN 2 GALLONS
(7=5 LITERS) AND
5 GALLONS (18.8 LITERS)
CAPACITY NROUGN
LOCAL SEARS STORE OR
SERVICE CENTER.
_'"'. ........... i !1I_
_,_ I
_'_il I_
WATER HEATER INSTALLATION KIT WITH
FLEXIBLE CONNECTORS FOR 8/4"
(19.05 ram) OR 1/2" (12.7 ram) THREADED OR
COPPER PLUMBING AND FLEXIBLE WATER
HEATER GAS CONNECTOR W_TH FITTINGS.
DRAIN PANS AVAILABLE iN 20"
(508 ram) DIAMETER FOR
WATER HEATERS HAVING A
DIAMETER 18" (457 ram) OR
LESS, 24" (510ram) DIAMETER
FOR WATER HEATERS HAVING
A DIAMETER 22" (559 ram) OR
LESS AND AVAILABLE IN 28"
(711 ram) DIAMETER FOR
WATER HEATERS HAVING A
DIAMETER 25" (550 ram) OR
LESS.
Basic Too_s
You may or may not need all these tools, depending on your
type of installation, These tools can be purchased at your local
Sears Store,
Pipe Wrenches (2) 14" (356 ram)
Screwdriver
Tin Snips
6' (1.82 m) Tape or Fo_ding Ru_er
Garden Hose
DriH
Pipe Dope or Teflon Tape
DRILL
SLOT-HEAD SCREWDRIVER
PHILLIPS SCREWDRIVER
TIN SNIPS
ROLL OF TEFLON
TAPE (USE ONLY ON
WATER CONNECTIONS)
PIPE DOPE
(SQUEEZE TUBE)
USE FOR WATER AND GAS
CONNECTIONS
GARDEN HOSE 5 FOOT TAPE PIPE WRENCH
Additionam Too_s Needed
When Sweat So_dering
Tubing Cutters or Hacksaw
Propane Tank
Soft Solder
Solder Fmux
Emery C_oth
Wire Brushes
TUBING CUTTER
PROPANE
TORCH
HACKSAW
ROLL OF
EMERYCLOTH
8/4" (19 ram) WiRE BRUSH
ROLL OF LEAD-FREE
1/2" (13 ram) WIRE BRUSH SOFT SOLDER
SOLDER
FLUX