Materials; Material Needed; Basic Tools - Kenmore THE ECONOMIZER 153.333850 Owner's Manual

Materials Needed
To simplify the installation Sears has available the installation parts shown below. You may or may not need all of these materials, depending
on your type of installation.
EXPANSION TANKS FOR
TH ERMAL EXPANSION
CONDiTiONS AVAILABLE
iN 2 GALLONS
(7.6 LITERS) AND
5 GALLONS (18,9 LITERS)
CAPACITY HROUGH
LOCAL SEARS STORE
OR SERVICE CENTER.
i
N, NI
WATER HEATER iNSTALLATiON KiT WITH
FLEXIBLE CONNECTORS FOR 3/4"
(19,05 ram) OR 1/2" (12.7 mm) THREADED OR
COPPER PLUMBING AND FLEXIBLE WATER
HEATER GAS CONNECTOR WiTH FITTINGS.
DRAIN PANS AVAILABLE iN
20" (508 ram) DIAMETER FOR
WATER HEATERS HAVING A
DIAMETER 18" (457 mm) OR
LESS, 24" (810ram) DIAMETER
FOR WATER HEATERS HAVING
A DIAMETER 22" (559 mm)
OR LESS AND AVAILABLE IN
28" (711 ram) DIAMETER FOR
WATER HEATERS HAVING A
DIAMETER 28" (680 ram) OR
LESS.
Basic Tools
You may or may not need all these tools, depending on your type of
installation. These tools can be purchased at your local Sears Store.
Pipe Wrenches (2) 14" (356 mm)
Screwdriver
Tin Snips
6' (1,82 m) Tape or Folding Ruler
Garden Hose
Drill
Pipe Dope or Teflon Tape
DRILL
SLOT-HEAD SCREWDRIVER
PHILLIPS SCREWDRIVER
TIN SNIPS
ROLL OF TEFLON
TAPE (USE ONLY ON
WATER CONNECTIONS)
PiPE DOPE
(SQUEEZE TUBE)
USE FOR WATER AND GAS
CONNECTIONS
GARDEN HOSE 6 FOOT TAPE PiPE WRENCH
Additional Tools Needed
When Sweat Soldering
Tubing Cutters or Hacksaw
Propane Tank
Soft Solder
Solder Flux
Emery Cloth
Wire Brushes
TUBING CUTTER
PROPANE
TORCH
HACKSAW
ROLL OF
EMERY CLOTH
3/4" (19 ram) WIRE BRUSH
1/2" (13 ram) WIRE BRUSH
ROLL OF LEAD-FREE
SOFT SOLDER
SOLDER
FLUX