Dynojet POWER VISION User Manual

Bench harness

Hide thumbs Also See for POWER VISION:

Download this manual

2191 MENDENHALL DRIVE, NORTH LAS VEGAS, NV 89081 - 800-992-4993 - DYNOJET.COM

POWER VISION

USER GUIDE

Bench Harness

PARTS LIST

POWER CORD

POWER SUPPLY

MAIN BENCH HARNESS

BENCH CONNECTION HARNESS

PLEASE READ ALL DIRECTIONS BEFORE

STARTING INSTALLATION

98200127.04

Need help?

Do you have a question about the POWER VISION and is the answer not in the manual?

Page 1 Bench Harness PARTS LIST POWER CORD POWER SUPPLY MAIN BENCH HARNESS BENCH CONNECTION HARNESS PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION 2191 MENDENHALL DRIVE, NORTH LAS VEGAS, NV 89081 - 800-992-4993 - DYNOJET.COM © 2019-2022 DYNOJET RESEARCH ALL RIGHTS RESERVED 98200127.04...
Page 2 Note: Pair to vehicle will only happen on the ﬁ rst ﬂ ash. Press Enter to pair and lock the Power Vision to the ECU and to begin the ﬂ ash. Do not unplug the power or disconnect the Power Vision during the ﬂ ash.
Page 3 Kawasaki. You must use Power Core Software version 2.0 or later. Available Tokens box. Plug the Power Vision into the vehicle you want to license and turn the key on Note: There must be tokens in to generate a new PV_INFO ﬁ le. The Power Vision will display arrows when the the account.
Page 4 POWER VISION TUNE LICENSING FOR YAMAHA/HONDA Use the following instructions to license your Power Vision for Yamaha and Verify you have tokens in the Honda. You must use Power Core Software version 2.0 or later. Available Tokens box. Flash the ECU with an STK ﬁ le. This will not pair the device if you haven’t paired Note: There must be tokens in already.