Dynojet Power Vision Installation Manual

For ski-doo 900 ace turbo

Hide thumbs Also See for Power Vision:

POWER VISION

INSTALLATION GUIDE

Ski-Doo 900 Ace Turbo

PARTS LIST

POWER VISION

REFLASH HARNESS

USB CABLE

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

2191 MENDENHALL DRIVE, NORTH LAS VEGAS, NV 89081

800-992-4993

VELCRO

DYNOJET DECAL

WWW.DYNOJET.COM

98200118

Table of Contents

Need help?

Do you have a question about the Power Vision and is the answer not in the manual?

Page 1 POWER VISION INSTALLATION GUIDE Ski-Doo 900 Ace Turbo PARTS LIST POWER VISION VELCRO REFLASH HARNESS DYNOJET DECAL USB CABLE PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION 2191 MENDENHALL DRIVE, NORTH LAS VEGAS, NV 89081 800-992-4993 WWW.DYNOJET.COM 98200118...
Page 2 Refer to the Power Core Help for more information. INSTALLING THE POWER VISION Secure the Power Vision to the vehicle using the supplied Velcro. Make sure the Power Vision will not interfere with the operation and steering of the vehicle.
Page 3: Getting Started
Note: Pair to vehicle will only happen on the ﬁ rst ﬂ ash. Press Enter to pair and lock the Power Vision to the ECU and to begin the ﬂ ash. Do not turn off the key switch or disconnect the Power Vision during the ﬂ...
Page 4 VIEWING THE DIAGNOSTIC CODES This menu allows you to read and clear diagnostic trouble codes. To read codes, select Vehicle Tools>Diagnostics>Active Codes. To clear codes, select Vehicle Tools>Diagnostics>Clear Codes. DELETING DATA LOGS This menu allows you to delete data logs. Select Vehicle Tools>Delete Data Log.
Page 5: Viewing The Device Information
Select Device Tools>Reformat Disk. CHANGING THE SETTINGS This menu allows you to rotate the screen allowing you to change the orientation of the Power Vision device along with adjusting the screen brightness. Select Device Tools>Settings>Rotate Screen to ﬂ ip the screen.