JVC TM-1600SU - Color Monitor Instructions Manual page 9

Set-up menu items
H. POSITION
V. POSITION
WHITE BALANCE
DRIVE R.DRIVE
G.DRIVE
B.DRIVE
CUT OFF R. CUT OFF
G. CUT OFF
B. CUT OFF
CONTROL LOCK
B. P. S. LEVEL
REMOTE SELECT
4. To set the other set-up menu items, repeat the
procedures 2 and 3.
5. Press the MENU button to quit.
MENU
Purpose
Adjusts the horizontal position of
the screen (+ : Horizontal position
shifts to the right/–: Horizontal
position shifts to the left)
Adjusts the vertical position on the
screen (+: Vertical position moves
down/–: Vertical position moves up)
Adjusts the white balance
Adjusts red level
Adjusts green level
Adjusts blue level
Adjusts red cut off
Adjusts green cut off
Adjusts blue cut off
Sets the operation buttons on the
front panel to control lock mode
Sets the level for Brightness Peak
Suppressor function
Sets the external control function
(ASPECT RATIO or BRIGHTNESS
P.S.)
Front panel Function
button displayed
MENU EXIT
–09 –08 • • • • • •
–09 –08 • • • • • •
Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment.
Screen setting is changed to the selected setting mode.
Select R/G/B buttons corresponding to the function display
to adjust.
–09 –08 • • • • • •
–09 –08 • • • • • •
–09 –08 • • • • • •
–09 –08 • • • • • •
–09 –08 • • • • • •
–09 –08 • • • • • •
OFF ON
00 01 • • • • • • •
OFF ASPT
Contents
Quit (or Release) the <MENU>
screen
Settings
–01 00 +01 • • • • • • +08
–01 00 +01 • • • • • • +08
–01 00 +01 • • • • • • +08
–01 00 +01 • • • • • • +08
–01 00 +01 • • • • • • +08
–01 00 +01 • • • • • • +08
–01 00 +01 • • • • • • +08
–01 00 +01 • • • • • • +08
09 10 11 • • • • • • •
OFF B.P.S.
* ASPT : ASPECT RATIO
B.P.S.: BRIGHTNESS P.S.
Notes:
● When the CONTROL LOCK function
is set to ON, pressing operation
buttons on the front panel will display
the message "CONTROL LOCK ON!"
on the screen for about 3 seconds.
● The CONTROL LOCK function is
maintained even when the power is
turned off.
● To turn off the CONTROL LOCK
function, while holding the MENU
button press the PHASE button. Then
set the CONTROL LOCK function to
OFF.
● Even when the CONTROL LOCK
function is set to ON, the following
operations are available:
– Power Switch operation.
– Sound volume adjustment with the
VOLUME/SELECT button.
– Display or disappear of the <SET-
UP MENU> screen.
– External control of ASPECT RATIO
or BRIGHTNESS P.S. when
REMOTE SELECT is set to ON .
+09
+09
+09
+09
+09
+09
+09
+09
19 20
9