How To Initialize The Setting - JVC TM-A13 Instructions Manual

HOW TO INITIALIZE THE
SETTING
SCREEN DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> RESET MODE
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and
the volume level to their factory-set (initial) values.
1. Press the Power (
—
OFF ( ).
ON
OFF
POWER
2. While pressing both MENU button and PHASE (
buttons, press the Power (
_
power ON (
PHASE MENU
POWER
3. Setting
Initialization is required.
CONTRAST
Initialization is not required.
– +
VOLUME/SELECT
(TM-A13SU / TM-A13SU-W)
– +
SELECT
(TM-A13UCV)
10
) Switch to turn the power
) switch to turn the
).
The <SET-UP MENU> RESET screen is displayed.
Note:
ON
OFF
● The <SET-UP MENU> RESET screen will not be
displayed if the MENU or PHASE buttons are pressed
for a very short time. Keep pressing them until the
display screen appears.
Press the CONTRAST (
* When initialization is completed, and the <SET-UP
MENU> RESET screen disappears.
Press the VOLUME/SELECT [+] or [–] button or the
SELECT [+] or [–] button.
* Initialization is aborted, and the <SET-UP MENU>
RESET screen disappears.
) button.
<SET-UP MENU> RESET screen
<SET–UP MENU> RESET
Are you sure ?
"Yes" then <CONTRAST>
"No" then <+>
)
Initial settings
Functions (Items)
SHARPNESS
COLOR SYSTEM
H. POSITION
WHITE BALANCE
R. CUT OFF
G. CUT OFF
B. CUT OFF
R. DRIVE
B. DRIVE
CONTROL LOCK
PHASE
CHROMA
CONTRAST
BRIGHT
VOLUME
* Volume is only available on the TM-
A13SU and TM-A13SU-W.
or <–>
Initialization
(setting)
00
AUTO
00
00
00
00
00
00
OFF
00
00
00
00
20