Toshiba DVR610 - DVDr/ VCR Combo Service Manual page 35

Dvd video recorder /video cassette recorder
Hide thumbs Also See for DVR610 - DVDr/ VCR Combo:
Table of Contents

Advertisement

Is the video signal outputted to Pin(15) of IC2406?
Is the video signal outputted to the emitter of Q2391?
Yes
Check the line between Pin(15) of IC2406
and Q2391, and replace P1 (BOARD
MCV) if defective.
Check the line between the emitter of Q2391 and
the video output terminal (JK2751), and replace
P1 (BOARD MCV) if defective.
FLOW CHART NO.11
Hi-Fi E-E audio does not operate normally.
Are the audio signals inputted to each pin of
IC2801?
IC2801
4,11PIN
AUDIO-IN1 (REAR)
IC2801
5,14PIN
AUDIO-IN2 (FRONT)
Are the audio signals outputted to Pin(3,13) of
IC2801?
Are the audio signals inputted to Pin(7,69) of
IC1451?
Is the 5V voltage supplied to Pin(5, 15, 32, 36, 46) of
IC1451, or the 9V voltage supplied to Pin(3) of IC1451?
Is the serial data and the clock signal supplied to
Pin(37, 38) of IC1451?
Continued to D on the next page.
C
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Is the "H" pulese inputted to Pin(9, 10, 11) of
IC2406?
Yes
Is 5V voltage supplied to
Pin(16) of IC2406?
Is -5V voltage supplied to
Pin(7) of IC2406?
No
Check the AL+5V, AL-5V line and replace
P1 (BOARD MCV) or P3 (BOARD POWER
SUPPLY) if defective.
Check the line between audio input terminal and
each pin of IC2801, and replace P1 (BOARD MCV)
No
if defective.
4,11PIN
IC2801
5,14PIN
IC2801
No
Are active level of Pin(9,10) of IC2801 become
as shown below?
INPUT
LINE(REAR)
LINE(FRONT)
Yes
Replace P1
(BOARD MCV).
No
Check the line between Pin(3,13) of IC2801 and
Pin(7,69) of IC1451, and replace P1 (BOARD
MCV) if defective.
No
Check the circuit of AL+5V, P-ON+5V(2) and
P-ON+9V, and replace P1 (BOARD MCV) or P3
(BOARD POWER SUPPLY) if defective.
No
Check the line between Pin(37, 38) of IC1451 and
Pin(17,18) of IC1501, and replace P1 (BOARD
MCV) if defective.
1-10-14
Replace P1
Yes
(BOARD MCV)
or P3 (BOARD
POWER SUPPLY).
→ JK2804
AUDIO-IN1 (REAR)
→ JK1232, JK1233
AUDIO-IN2 (FRONT)
9PIN 10PIN
H
H
L
H
No
Check the line between
Pin(9,10) of IC2801 and
Pin(60,61) of IC1501, and
replace P1 (BOARD MCV)
if defective.
No
E9KGATR

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-vr610ku

Table of Contents