Procedure For Issuing Command - Pioneer PRV-LX1 Protocol Manual

PRV-LX1 IEEE-1394 Protocol
5.0

Procedure for Issuing Command

Example: playing Title 2, from the scene10 minutes to 20 minutes
"Drive Select" and "Selecting the project" are not available when using the remote control. Issue a
"01:20:00:00:E0: 36:81:00:00 "Title Number Sense" command from Stop to get the total number of titles for the
current project.
Total time of the title cannot be acquired directly by a remote command. However, when a title is played by
remote commands (e.g. "0C: 20:C4: 75 Fast Forward"), the title is Paused at the end of the title. To calculate the
total time of the title, use the "01:20:51:71:FF: FF: FF: FF Medium Position Inquiry Time-code" command fwhen
PAUSE is returned by the "01:20:D0: 7F Mecha-Mode Status Inquiry" command.
Page 9 of 12