Foreword - Pioneer PRV-LX1 Protocol Manual
Ieee-1394 interface protocol
Hide thumbs
Also See for PRV-LX1:
- Operating instructions manual (104 pages) ,
- Training manual (38 pages) ,
- Manual (38 pages)
Table of Contents
Advertisement
1.0
Foreword
The PRV-LX1 can be controlled externally using IEEE-1394 commands. Control is applied through the
4-pin connection located on the rear of the recorder. Set the IEEE-1394 REMOTE controls through the
main menu. With a monitor connected to the PRV-LX1, press the Function button on the PRV-LX1's
front panel to access the menu. Control Settings are accessed through the Setup/Operation menu.
Note: This document is valid for PRV-LX1 System Version 3.01/1.04 or later.
Note: The recorder's DV Recording must be set for Remote (under Status > Control Settings > Control) to
have the unit recognize IEEE-1394 external control options (see image below).
Advertisement
Table of Contents
