Advertisement
Quick Links
This user guide details the TCAN10xx CAN (Controller Area Network) EVM transceiver operation. The
TCAN10xx CAN EVM is configurable for use with all TI CAN transceiver families: TCAN10xx, TCAN33x,
SN65HVD23x, SN65HVD25x, SN65HVD10x0, and SN65HVDA54x by replacing the transceiver and
setting jumpers on the EVM as outlined in this document. This user guide explains the EVM configurations
for basic CAN evaluation, various load and termination settings.
...................................................................................................................
1
Introduction
2
2 EVM Setup and Operation
3
CAN EVM Configuration for TCAN1042HGV-Q1 (Factory Installed)
1
EVM PC Board
2
EVM Schematic
3
TCAN1042 Basic Block Diagram
1
Jumper Connections
2
JMP2 Pin Definitions
3
Bus Termination Configuration
4
Protection and Filtering Configuration
5
RC Filter and Protection Lists
6
EVM Connection Settings for TCAN1042
All trademarks are the property of their respective owners.
SLLU234 – February 2016
Submit Documentation Feedback
...............................................................................................
...............................................................................................................
..............................................................................................................
..........................................................................................
........................................................................................................
.......................................................................................................
.............................................................................................
.....................................................................................
.............................................................................................
................................................................................
Copyright © 2016, Texas Instruments Incorporated
TCAN Evaluation Module
Contents
.................................................
List of Figures
List of Tables
User's Guide
SLLU234 – February 2016
TCAN Evaluation Module
2
5
9
2
3
9
4
5
7
7
8
9
1
Advertisement
Related Manuals for Texas Instruments TCAN10 Series
Summary of Contents for Texas Instruments TCAN10 Series
- Page 1 Protection and Filtering Configuration ..................... RC Filter and Protection Lists ................EVM Connection Settings for TCAN1042 All trademarks are the property of their respective owners. SLLU234 – February 2016 TCAN Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
- Page 2 Choke, the EVM has footprints available for this via customer installation of the desired components. Figure 1 shows the EVM board image. Figure 1. EVM PC Board TCAN Evaluation Module SLLU234 – February 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
- Page 3 Test Point Test Point 4.7k JMP6 VRXD 4.7uF Test Point Place near DUT Pint 10uF .1uF TP10 Test Point 2PIN_TERMINAL_BLOCK Figure 2. EVM Schematic SLLU234 – February 2016 TCAN Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
- Page 4 CANL via 330-Ω serial resistor test point Test Point RXD, Device pin 4 test point Device pin 5 test point test point TP10 TP11 GND test point TP12 TP13 TCAN Evaluation Module SLLU234 – February 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
- Page 5 The RXD (pin 4) of the transceiver, receive data is routed to JMP2 and TP7. The signal path to the JMP2 header is pre-installed with a 0-Ω series resistor, R13. SLLU234 – February 2016 TCAN Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
- Page 6 2.1.13 TP8 Configuration This connects directly to device pin 5. Ensure JMP6 configuration is not conflicting if TP8 is used as an input connection. TCAN Evaluation Module SLLU234 – February 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
- Page 7 ESD protection, TVS diode population C2/C7 or D1/D2 Transient and ESD protection option via D1/D2 footprint or varistor population via C2/C7 footprint. SLLU234 – February 2016 TCAN Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
- Page 8 R2 pulldown to GND (JMP1) R2/R3 user-installable for use with S, R , STB Input R1 (JMP1) (JMP1) slope mode on devices with pin. Connect TCAN Evaluation Module SLLU234 – February 2016 Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
- Page 9 Connect if necessary for in parallel with JMP4 to get a 60-Ω load to measure CAN parametrics TCAN1042 V - Level-shifting for applications that require 3.3-V operation. Connect to 5-V supply for 5-V JMP6 applications and 3.3-V for 3.3-V applications. SLLU234 – February 2016 TCAN Evaluation Module Submit Documentation Feedback Copyright © 2016, Texas Instruments Incorporated...
- Page 10 STANDARD TERMS AND CONDITIONS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, or documentation (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms and conditions set forth herein. Acceptance of the EVM is expressly subject to the following terms and conditions.
- Page 11 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 12 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧くださ い。http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page SPACER EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS.
- Page 13 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated...
- Page 14 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue.
- Page 15 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments TCAN1042DEVM...
Need help?
Do you have a question about the TCAN10 Series and is the answer not in the manual?
Questions and answers