HP RP7 Installation Instructions page 2

HP Retail Integrated
Fingerprint Reader
Installation
Instructions
Copyright © 2012 Hewlett-Packard Development Company,
L.P. The information contained herein is subject to change
without notice. Printed in
691053-002
Installing Drivers for the Fingerprint
Reader
The drivers for the fingerprint reader are pre-loaded on
the HP RP7 Retail System. You can also download the
latest drivers from www.hp.com.
Configuring the Fingerprint Reader
To configure the fingerprint reader, refer to the HP Point
of Sale Configuration Guide (available in English only).
The guide is available on the HP factory image of the
RP7 system's hard drive and at www.hp.com. To access
the guide on the factory image:
• In Windows Embedded POSReady 2009, select
Start > All Programs > HP Point of Sale Information.
• In Windows 7 or Windows Embedded POSReady
7, select Start > HP Point of Sale Information.
NOTE: Refer to the HP RP7 Retail System Hardware
Reference Guide at www.hp.com for detailed
instructions on installing USB modules.
HP RP7 Retail System
CAUTION: This accessory is for use
only with compatible UL Listed host
products that have been evaluated
for the operating altitude up to
3048m/10,000 feet. Use only with
Listed ITE.