HP RP7 Model 7800 Hardware Reference Manual page 61

Retail system

Hide thumbs Also See for RP7 Model 7800:

Table of Contents

14.

Swing the antenna bracket in toward the chassis (1), connect the DisplayPort signal cable (2)

and power cable (3), and close the memory access door (4).

15.

Attach the RP7 display head to the stand's mounting bracket by aligning the slots on the display

head with the hooks on the mounting bracket and sliding the display down (1). Install the three

screws through the mounting bracket and into the display head to secure it in place (2).

Replacing the Battery

Table of Contents

Show Quick Links

Table of Contents