Page 1
Smart Lock Thank you for purchasing our products. Please review this manual thoroughly before operating your device. All pictures in this manual are for illustration purpose only. Actual product may vary due to product upgrade.
Page 9
Determine backset and adjust the latch No adjustment is required. Proceed to next step. 180° Slotted hole is 90° NOT centered. Hold the latch in front of the door Rotate and pull the hole, with the latch face flush against latch as shown to the door edge.
Page 10
Use a screwdriver to test if deadbolt works smoothly. IMPORTANT: Install strike on the door frame. Make sure the hole in door frame is drilled a minimum of 1" (25mm) deep.
Page 18
This equipment has been tested and found to comply with the limits for English:This device contains licence-exempt transmitter(s)/receiver(s) that a Class B digital device, pursuant to part 15 of the FCC Rules. These comply with Innovation, Science and Economic Development Canada’s limits are designed to provide reasonable protection against harmful licence-exempt RSS(s).
Need help?
Do you have a question about the VE07-L and is the answer not in the manual?
Questions and answers