Kaboodle W-62003 Installation Manual

step 2
Follow these
instructions to
install your parts
and accessories.
Things you need to know
• Always read the full instructions prior to installation.
• Consider possible obstructions to your parts & accessories,
like hinges inside the cabinet or adjacent cabinet doors and
handles, prior to installation.
• Make sure you leave plumbing and electrical work
to qualified trades people. Never try this yourself.
• Make sure you always use safety gear like a mask, ear muffs
and glasses when using tools.
• Tip: After marking out the pre-drill holes as per the
instructions, take the part that is to be installed and align
the appropriate holes with the markings to ensure they
match up prior to pre-drilling the holes.
Hardware included
A B
Basket Mount x 2
Rotating Tray x 2
G
Drilling template x 1
Tools you will need
To put your kaboodle kitchen accessory together you will need the following tools.
Cordless drill with:
Spirit level
(optional) • Number 2 screw tip
• 2mm drill bit
corner rotating baskets 2 tier
• If you have any questions, contact us on:
Australia: 1800 666 078 Monday to Friday between
8:00am and 6:00pm AEST, New Zealand: 0800 522 663
Monday to Friday between 8:00am and 5:00pm NZST
or email: info@kaboodlegroup.com.au
• Instructions apply to:
W-62003 Corner Rotating Tray 2 Tier Solid Shelf
Premium Dark Grey**
• Note: Illustrations found in this installation guide serve as a
reference and may vary when compared to the actual product
C D
Basket fixing clip
Centre Pole x 1
x 2
Tape
measure Pencil
installation guide
E
Inner Pole x 1
Screw
Safety
driver
gear
F
Fixing screws x 6
Adjustable Clamps
(optional)
square
p. 1