Table of Contents
Advertisement
8
Appendix
Maintenance
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
•
Keeping the exterior surfaces clean. Do not use volatile
liquids such as insecticide spray near the unit.
•
Wiping with strong pressure may damage the surface.
•
Do not leave rubber or plastic products in contact with the
unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished. For
details, please contact your nearest authorized
service center.
Updating the Firmware
Manual Update
1. On a computer, go to http://support.asus.com and
input your player's model number and check if
there are any newer firmware version available.
2. If a newer firmware version is available, download
it into your computer. If the file is compressed,
uncompressed it and copy it into a USB flash
drive's root menu.
3. Insert the USB flash drive into your player's
available USB port.
4. Turn on your player and navigate to Home, then
Setup and Other.
5. In the Other menu, select the Firmware Update
and press → on your remote control.
6. Follow the onscreen instruction and update the
firmware.
Warning: Do not turn off your player
while the firmware is being updated. If
your output source is a HDMI cable, don't
switch the output source while updating
your firmware.
After the firmware is finished updating the player will
reboot. The new firmware version will take effect.
Online Update
1. Turn on your player and navigate to Home, then
Setup and Other.
2. In the Other menu, select the Firmware Update
and press → on your remote control.
3. Select the firmware update "Via Internet" and
follow the onscreen instruction and update the
firmware.
Appendix 28
Advertisement
Table of Contents
