Related Manuals for Hillstone SG-6000 Series
Summary of Contents for Hillstone SG-6000 Series
- Page 1 Hillstone StoneOS User Manual Hillstone Multi-core Security Appliance Installation Manual StoneOS 5.0R4P3.1 www.hillstonenet.com...
- Page 2 Hillstone Multi-core Security Appliance Installation Manual Name and Concentration of Toxic or Hazardous Substances and Elements in Products Toxic or hazardous substances and elements Component Lead Mercury Cadmium Cr6+ PDBE Metal parts Χ (including fasteners) Printed circuit board assemblies and Χ...
-
Page 3: Preface
Hillstone Multi-core Security Appliance Installation Manual Preface About This Manual Thanks for choosing the network security products from Hillstone Networks, Inc. This document is an installation manual for Hillstone multi-core security appliances to help you install the Hillstone multi-core security appliance properly. -
Page 4: Table Of Contents
Hillstone Multi-core Security Appliance Installation Manual Table of Contents NAME AND CONCENTRATION OF TOXIC OR HAZARDOUS SUBSTANCES AND ELEMENTS IN PRODUCTS ..... 2 PREFACE ..................................3 ................................3 BOUT ANUAL ..............................3 OCUMENT ONVENTIONS TABLE OF CONTENTS ..............................4 LIST OF FIGURES ................................. 6 LIST OF TABLES ................................ - Page 5 Hillstone Multi-core Security Appliance Installation Manual Connecting the Ground Wire ............................ 33 Connecting the Console Cable ........................... 33 Connecting the Ethernet Cable ..........................33 Connecting an AC Power Cable ..........................34 Connecting a DC Power Cable ........................... 34 Connecting a Power Adapter ............................ 35 ..............................
- Page 6 Hillstone Multi-core Security Appliance Installation Manual List of Figures Figure 1-1: SG-6000-G5150 Front Panel ........................3 Figure 1-2: SG-6000-G2120 Front Panel ........................4 Figure 1-3：SG-6000-M8860 Front Panel ........................4 Figure 1-4：SG-6000-M7260 Front Panel ........................5 Figure 1-5: SG-6000-M3108 Front Panel ........................6 Figure 1-6: SG-6000-M3100 Front Panel ........................
- Page 7 Hillstone Multi-core Security Appliance Installation Manual List of Tables Table 1-1: SG-6000-G5150 Front Panel Description ....................3 Table 1-2: SG-6000-G2120 Front Panel ........................4 Table 1-3: SG-6000-M8860 Front Panel Description ....................5 Table 1-4: SG-6000-M7260 Front Panel Description ....................6 Table 1-5: SG-6000-M3108 Front Panel Description ....................
-
Page 8: Chapter 1 Introduction
The hardware modular design of SG-6000 series expands the performance and solves the performance weakness of the existing UTM products when AV and IPS protections are turned on. SG-6000 series have a processing ability from 100 megabits to 10 gigabits, making it suitable for various network environments, including networks of SMEs, governments, large enterprises, ISPs and IDCs, etc. -
Page 9: Name And Concentration Of Toxic Or Hazardous Substances And Elements In Products
Modular Design Some models of Hillstone SG-6000 series support expansion modules. There are two kinds of pluggable hardware expansion modules: I/O module and storage module. The modular design greatly protects customer’s investment. -
Page 10: Document Conventions
Hillstone Multi-core Security Appliance Installation Manual Figure 1-1: SG-6000-G5150 Front Panel Label Label Label PWR: Power FAN: Fan tray e0/0 - e0/3: Gigabit Ethernet ports STA: Status CLR: CLR e0/4 - e0/11: SFP ports button CON: Console Slot 1: General expansion... -
Page 11: Table Of Contents
Hillstone Multi-core Security Appliance Installation Manual Figure 1-2: SG-6000-G2120 Front Panel Label Label Label PWR: Power PS1: Power PS1 e0/0 - e0/3: Gigabit Ethernet ports STA: Status CLR: CLR button e0/4 - e0/7: SFP ports CON: Console Slot 1: General expansion... -
Page 12: Figure 1-4：Sg-6000-M7260 Front Panel
Hillstone Multi-core Security Appliance Installation Manual Label Label Label PWR: Power e0/2 - e0/5: Gigabit CLR: CLR button Ethernet ports STA: Status CON: Console port e0/6 - e0/9: SFP ports ALM: Alarm AUX: Auxiliary Slot 1: General expansion port slot... -
Page 13: List Of Figures
Hillstone Multi-core Security Appliance Installation Manual supply PS0 slot (not for storage expansion module) PS1: Power Slot 4: General expansion MGT (e0/0): supply PS1 slot (not for storage management port expansion module) FAN: Fan HA (e0/1): HA port Table 1-4: SG-6000-M7260 Front Panel Description... -
Page 14: List Of Tables
Hillstone Multi-core Security Appliance Installation Manual Label Label Label HA：HA status PWR: Power USB: USB port STA: Status e0/0 - e0/7: Gigabit Ethernet CLR: CLR button ports ALM: Alarm CON: Console port Table 1-6: SG-6000-M3100 Front Panel The front panel of SG-6000-M1600 consists of 5 Gigabit Ethernet ports, 1 USB port, 1 Console port, 1 CLR button and some LED indicators. -
Page 15: Figure 1-9: Sg-6000-E1700 Front Panel
Hillstone Multi-core Security Appliance Installation Manual Label Label Label e0/0 - e0/8: Gigabit PWR: Ethernet port status USB: USB port Power LED STA: e0/5 - e0/8: SFP e0/0 - e0/4: Gigabit Status LED interface LED Ethernet ports e0/0 - e0/4: Combo ports... -
Page 16: Figure 1-11: Front Panel Of Sg-6000-E1100 (Wlan Version)
Hillstone Multi-core Security Appliance Installation Manual Label Label Label PWR: Power LED STA: Status LED e0/0 - e0/8: Gigabit Ethernet ALM: Alarm LED port status LED Table 1-10: SG-6000-E1600 Front Panel Description The front panel of SG-6000-E1100 (WLAN version) consists of some LED indicators. -
Page 17: Back Panel
Hillstone Multi-core Security Appliance Installation Manual Label Label Label PWR: Power 3G: 3G STA: Status LED e0/0 - e0/8: Gigabit Ethernet ALM: Alarm LED port status LED Table 1-12: Front Panel Description of SG-6000-E1100 (3G version) The front panel of SG-6000-E1100 (WLAN+3G version) consists of some LED indicators. -
Page 18: Figure 1-15: Sg-6000-G2120 Back Panel
Hillstone Multi-core Security Appliance Installation Manual Figure 1-15: SG-6000-G2120 Back Panel The back panel layout of SG-6000-M8860 consists of 2 power supply sockets, 1 grounding screw. The standard product of SG-6000-G8860 adopts dual power supplies and it is also available in single power supply. Figure 1-16 is the back... -
Page 19: Figure 1-19: Sg-6000-M3100 Back Panel
Hillstone Multi-core Security Appliance Installation Manual Figure 1-19: SG-6000-M3100 Back Panel The back panel of SG-6000-M1600 has 1 power supply socket, 1 power supply switch and 1 grounding screw. Figure 1-20 illustrates the back panel of SG-6000- M1600. Figure 1-20: SG-6000-M1600 Back Panel SG-6000-E2800, SG-6000-E2300, and SG-6000-E1700 have the same back panel layout. -
Page 20: Figure 1-23: Sg-6000-E1100 (Wlan Version) Back Panel
Hillstone Multi-core Security Appliance Installation Manual keyhole, and 2 SMA connectors for WLAN antennas. Figure 1-23 illustrates the back panel of this model. Figure 1-23: SG-6000-E1100 (WLAN version) Back Panel Label Label Label DC POWER: DC SMA connectors for Security keyhole... -
Page 21: Led Indicators
- e0/8: Gigabit port Ethernet port Table 1-17: Back Panel Description of SG-6000-E1100 (WLAN+3G version) LED Indicators Table 1-8 describes the meanings of LED indicators on the front panels of Hillstone multi-core security appliances. Color/Status Description Green/Always The device power is running normally. - Page 22 Hillstone Multi-core Security Appliance Installation Manual The device is powered off. Green/Always The system is booting. Green/Blinking The system is running normally. Red/Always on The system has failed to boot or has an error. Red/Always on The system is sending alarm(s).
-
Page 23: System Parameters
As the number and type of LED indicators may vary from different product models, please refer to the actual product. System Parameters Table 1-9 lists the system parameters of Hillstone multi-core security appliances of all models. Item Description... - Page 24 Hillstone Multi-core Security Appliance Installation Manual 8 Gigabit Ethernet ports 2 Gigabit Combo ports SG-6000-M3108 1 USB 2.0 Host port 1 SD card slot 1 Console port 8 Gigabit Ethernet ports 1 USB 2.0 Host port SG-6000-M3100 1 Console port...
- Page 25 Hillstone Multi-core Security Appliance Installation Manual SG-6000-E1600 SG-6000-E1100 (WLAN version) SG-6000-E1100 (3G version) SG-6000-E1100 (WLAN+3G version) SG-6000-G5150 440.0 mm x 520.0 mm x SG-6000-M8860 88.0 mm SG-6000-M7260 436.0 mm x 365.5 mm x SG-6000-G2120 44.0 mm SG-6000-M3108 SG-6000-M3100 442.0 mm x 240.7 mm x...
-
Page 26: Ports
CPU. Flash Memory is used for storing the operating system firmware, configuration and application files. Ports This section introduces attributes of interfaces (ports) on the Hillstone devices, including console port, auxiliary port, USB port, gigabit copper port, SFP port and XFP port. -
Page 27: Table 1-20: Console Port Attributes
Aux port is used for debugging. Transmission console cable Medium Table 1-21: Auxiliary Port Attributes USB Port Hillstone multi-core security appliance provides up to two USB host ports. Attributes for the USB port are shown in Table 1-12. Attribute Description Connector USB Type-A interface Port Standard USB 2.0 host interface... -
Page 28: Table 1-23: Gigabit Copper Port Attributes
Ethernet_II Frame Format Ethernet_SNAP 10/100/1000Mbps autosensing Negotiation Mode Full/half-duplex Table 1-23: Gigabit Copper Port Attributes SFP Port Hillstone multi-core security appliance supports SFP ports. The Table 1-14 describes the attributes of SFP port. Attribute Description Connector Ethernet_II Frame Format Ethernet_SNAP... -
Page 29: Table 1-25: Sfp Optical Module Attributes
Combo ports, you need to first clear the rate and duplex mode configurations in the current operating mode (copper or optical), and re- configure the port after the switching. XFP Port Hillstone multi-core security appliances support XFP ports which use XFP optical modules. Chapter 1 Introduction Hillstone... -
Page 30: Clr Button
Connector Ethernet_II Frame Format Ethernet_SNAP Negotiation Mode XFP optical module 10Gbps Table 1-27: XFP Port Attributes Hillstone multi-core security appliance supports five types of 10GBase-FX XFP optical module. All optical modules are hot-swappable. Description Short- Short-haul Medium- Long-haul Ultra-long haul... -
Page 31: Expansion Slot
3. Rip off the label stuck on the slot. 4. Push the SD card slightly and it will pop up. Note: Hillstone adopts the Secure Digital High Capacity (SDHC) standard. To ensure the requirements of capacity and storage writing speed, the SD card should at least have a capacity of 4GB and a speed of Class 4 (4 MB/s). -
Page 32: Power Supply
Table 1-29: Power Supplies of All Product Models Power Module Hillstone designs a model of pluggable module for SG-6000-G5150, SG-6000- M8860, and SG-6000-M7260. Both AC and DC power modules are available. You can choose the power type at your own choice. -
Page 33: Expansion Modules
Hillstone Multi-core Security Appliance Installation Manual Figure 1-26: AC Power Module for SG-6000-G5150/M8860/M7260 Figure 1-27: DC Power Module for SG-6000-G5150/M8860 /M7260 The power LED description for SG-6000-G5150, SG-6000-M8860, and SG-6000- M7260 is listed in Table 1-20. Color/Status Description Green/Always on Power module is functioning normally. - Page 34 Hillstone Multi-core Security Appliance Installation Manual Storage module: Enlarges the hardware space for storing logs. For detailed information about expansion modules, see Hillstone Multi-core Security Appliance Expansion Modules Manuel. Chapter 1 Introduction Hillstone...
-
Page 35: Chapter 2 Installation Preparations
To prevent personnel injury and equipment damage, please carefully read all the safety warnings and cautions in this chapter before the installation. Hillstone products are designed for indoor use. To ensure the normal operation and to prolong the service lifetime, the installation site must meet the following... -
Page 36: Grounding Requirements
If you have any problem, please contact your sales representative. Installation Devices/Tools/Cables A Hillstone security appliance is shipped with a power cable and a console cable, and you should have the following items before the installation: Terminal: Configuration terminal (e.g. an ordinary PC). - Page 37 Hillstone Multi-core Security Appliance Installation Manual Tools: Philips screwdrivers and ESD wrist strap. Cables: Power cable, console cable and Ethernet cable. Chapter 2 Installation Preparations Hillstone...
-
Page 38: Chapter 3 Installation
On a workbench On a standard 19-inch rack Installing the Appliance on a Workbench Hillstone product can be placed on a stable and clean workbench. For skid prevention, take the following steps to fit anti-skid pads on the appliance before installing: Step 1: Tear off the sticker from the rubber pad. -
Page 39: Installing The Appliance On A Rack
Installing the Appliance on a Rack Before mounting the appliance on a rack, ensure that the power is off, and the rack is stable enough and well grounded. Hillstone multi-core security appliances are designed for a 19-inch standard rack. To mount the chassis on a rack:... -
Page 40: Connecting Cables
Connecting the Ethernet Cable Hillstone products provide 1000Mbps electrical Ethernet ports, SFP ports, XFP ports and Ethernet Combo ports (Electrical port + Optical port). The electrical Ethernet port can be connected by a straight-through cable (also called standard cable) or a crossover cable. -
Page 41: Connecting An Ac Power Cable
Note: If a product does not have a power switch, you can skip Step2 and Step4. Connecting a DC Power Cable To power the appliance with DC power source, use DC power cables to connect the appliance and the external DC power source. Hillstone does not provide DC power cables. Chapter 3 Installation... -
Page 42: Connecting A Power Adapter
Hillstone Multi-core Security Appliance Installation Manual Warning: Before performing the procedure, ensure that the cable is not connected with any power source and make sure the cables will not be powered on during the process. To connect the DC power cable to the appliance, take the following steps: 1. -
Page 43: Installing The Sim Card
Hillstone Multi-core Security Appliance Installation Manual Figure 3-4: 3G Antenna and WLAN Antenna To install antennas for SG-6000-E1100 (WLAN version), SG-6000-E1100 (3G version), or SG-6000-E1100 (WLAN+3G version), take the following steps: 1. According to the function you use, select the corresponding antenna. -
Page 44: Verifying Installation
Hillstone Multi-core Security Appliance Installation Manual 2. Insert the SIM card into the SIM card slot at the back panel of the device. Notes: The security appliance of SG-6000-E1100 (WLAN version) only supports the external 3G data card. Before using the 3G function, insert the 3G data card with a SIM card into the USB port at the back panel of the device. -
Page 45: Chapter 4 Boot And Configuration
Hillstone Multi-core Security Appliance Installation Manual Chapter 4 Boot and Configuration Introduction This chapter describes the initial system boot and basic configuration of Hillstone SG-6000 series, using a PC as the console terminal. Establishing a Configuration Environment Hillstone security appliances support both local and remote configuration. -
Page 46: Webui
2. Launch a Web browser of the management PC, enter the URL http://192.168.1.1 in the address bar, and then press Enter. 3. Enter the default administrator name and password “hillstone” in both the Login and Password text boxes. 4. Click the Login button to enter WebUI main page. Then you can set other configurations to the appliance. -
Page 47: Tenet And Ssh
5. Keep network connectivity by configuring routes. 6. Configure security policy rules between security zones. 7. Configure network parameters, such as DHCP and DNS agent, etc. For more information, see Hillstone Multi-core Security Appliance User Manual. Chapter 4 Boot and Configuration Hillstone... -
Page 48: Chapter 5 Hardware Maintenance And Replacement
Hillstone Multi-core Security Appliance Installation Manual Chapter 5 Hardware Maintenance and Replacement Introduction This chapter explains how to install and remove the power supply module, the expansion module and the fan tray. Installing and Removing the Power Supply Module This section describes how to install and remove the power supply module of SG- 6000-G5150, SG-6000-M8860, and SG-6000-M7260. -
Page 49: Installing And Removing The Expansion Module
Hillstone Multi-core Security Appliance Installation Manual Installing and Removing the Expansion Module SG-6000-G5150, SG-6000-G2120, SG-6000-M8860, and SG-6000-M7260 can accommodate expansion modules. This section describes how to install and remove the expansion module. To install an expansion module: 1. Make sure the power is switched off and you should wear the ESD strap properly. -
Page 50: Chapter 6 Troubleshooting
Hillstone Multi-core Security Appliance Installation Manual Chapter 6 Troubleshooting Introduction This chapter provides solutions to some common problems of Hillstone multi-core security appliances. Losing the Administrator Password If you lose the administrator password, please contact your local sales representative. Troubleshooting Power System Check the PWR LED on the front panel of the appliance. -
Page 51: Copyright Information
Hillstone, Hillstone Networks logo, StoneOS, StoneManager, Hillstone PnPVPN, UTM Plus are trademarks of Hillstone Networks. All other trademarks or registered marks are the property of their respective owners. Hillstone Networks assumes no responsibility for any inaccuracies in this document. Hillstone Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
Need help?
Do you have a question about the SG-6000 Series and is the answer not in the manual?
Questions and answers